Is cast stone the same as concrete?
The most significant difference between architectural precast concrete and cast stone is that cast stone isn’t permitted to contain bugholes or air voids and must have a fine-grained texture. The texture is normally achieved by acid etching.
What is the cost of cast stone?
Cast stone installed costs $15.00 to $25.00 per sq. ft.
Can a cast stone break?
Cracks can also occur through the body of the cast stone but may remain undetected until after installation.
How much does fake stone cost?
Stone veneer can vary from $6 to $9 per square foot, compared to natural stone siding costing $15.00 to $30.00 per square foot. Obviously, the larger the area you’re covering, the higher the cost will rise.
Should you paint cast stone?
Cast stone can be antiqued, faux finished, or distressed to give it the patina of age. We do not paint at the factory. Sealing is highly recommended since all cast stone is porous and subject to staining. Any high quality, clear, matte finish stone sealer may be used.
Should cast stone be sealed?
Since cast stone is made from concrete it should be sealed to preserve the appearance and prevent deterioration.
Is stone more expensive than siding?
The average-sized home can cost between $25,000 and $55,000 for standard brick siding and $27,000 to $80,000 for standard stone. However, the exact costs will depend on a few factors, like your project’s exact specifications and the location of your home. $4 to $10 per sq. ft.
Does faux stone look real?
One of the best things about faux stone veneer panels is that, from a distance, they often can visually pass for real stone. At the very least, faux stone looks no less like a natural stone than does manufactured veneer stone. Bargain faux veneer panels sometimes look decidedly fake.
Do you need to seal cast stone?
Unless you want a specific look, cast stone does not need a finish or sealer. Some like to seal it to make future cleaning easier (only a soft brush and water). To protect your stone from the elements, we recommend PROSOCO’s Weather Seal PD or ChemProbe’s Prime-A-Pell®.
Does cast stone fade?
Cast stone manufacturers spend lots on marketing and make claims that their materials have the same maintenance features but the durability falls short usually with color fading and eventual breakdown of the materials used.
How do you take care of a cast stone?
Cast stone should be cleaned regularly to avoid dust and dirt build-up. You may clean the surface using warm water and a clean white towel. If the cast stone product surface has become soiled, you may use a solution of 1 part mild detergent, such as 409, with 3 parts warm water.
Does stone increase home value?
Not only does stone give your home a sophisticated look, but it actually adds value to your home. According to the 2016 Cost vs. Value Report, you can recoup up to 93 percent of the value of natural stone veneer. This makes stone veneer a natural choice when considering options to boost your home’s curb appeal.
How do you waterproof a cast stone?
Prepare the Stone
- Clean the stone, using a garden hose.
- Apply the exterior stone sealant, using a paint roller or paintbrush.
- Wipe off the excess sealant, using a clean rag.
- Apply a second coat of the sealer if the natural cast stone is porous.
- Allow the sealer to cure for 24 to 72 hours.