What is the density of rigid insulation?
While EPS with a density of 1 lb. per cu. ft. is adequate for use in structural-insulated panels (SIPs) and insulating concrete forms (ICFs), only the higher-density (generally type IX EPS with a density of 2 lb. per cu.
What is the density of XPS foam?
These pores provide excellent thermal insulation. 98% of the material is air. It is therefore a very light material. It is generally produced in densities of 10-30 kg / m3.
What is high density foam board?
A high-quality, cost-effective closed-cell PVC foam specially formulated to provide high physical properties. Engineered to be easy to work with, be weatherproof and deliver good insulation properties, Additionally, it has superior fire behavior.
How strong is FOAMULAR?
Available in 40, 60 and 100 psi compressive strengths. Moisture Effective resistance against moisture, mildew, corrosion and rot.
What is the difference between Type 1 and Type 2 insulation?
Type 1 polystyrene insulation has a typical thermal resistance value or R3. 7/in., while Type 2 polystyrene insulation has a minimum thermal resistance value of R4.
What is the difference between Foamular 150 and 250?
FOAMULAR® is a popular energy saving, moisture resistant, XPS insulation from Owens Corning. The difference between 150 and 250 is simply the compressive strength of each type.
What is density of Foamular?
Density, kg/m3, min. Compressive Strength, kPa, min. 100 (4”) 0.029 (k=0.20) 3.53 (R-20)
What is the difference between low and high density foam?
Foams with a high density will generally feel more firm, and can withstand more pressure. Conversely, low-density foams will feel softer, but cannot withstand excessive pressure or weight.
How much weight can rigid foam support?
Q: How much weight can EPS Carry? ASTM C578 standard for EPS type I is 10psi or 1,440 pounds per square ft (1 square foot is equal to 144 square inches). One square inch of Type I EPS can support 10 pounds; however, set a one square foot board on the foam and it can support 1,440 pounds.
What is the R value of 2 inch pink foam board?
With an R-value of 13.1 for a 2″ thick sheet only two 2″ sheets are required to achieve R-25. 2. Extruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5″ of insulation to achieve R-25.
What is the strength of foam board?
Compressive strengths† from 30 psi to 100 psi (210 kPa to 690 kPa) to meet the requirements of nearly every application. BASIC USE: COMPOSITION AND MATERIALS: A series of high strength extruded polystyrene rigid insulation boards used for civil engineering and other commercial applications.
What type of foam is FOAMULAR?
extruded polystyrene
FOAMULAR is a rigid insulation board made of extruded polystyrene. XPS for short. Compared to EPS products, FOAMULAR XPS has 25% more insulating power and is 10 times more water resistant.
How much weight can a foam board hold?
What is Foamular® 400?
Owens Corning™ FOAMULAR® 400 is a high strength extruded polystyrene (XPS) insulation product designed for use in engineered applications requiring additional load-bearing capability such as under slab, concrete floors, foundations, roadways and rail beds, plaza and parking decks and cold storage installations.
How thick is Foamular 400 high density extruded polyurethane?
Product Thickness FOAMULAR® 400 High Density Extruded Poly 25.0 mm 1.0 in. FOAMULAR® 400 High Density Extruded Poly 38.0 mm 1.5 in. FOAMULAR® 400 High Density Extruded Poly 51.0 mm 2.0 in. FOAMULAR® 400 High Density Extruded Poly 76.0 mm 3.0 in.
What is Foamular® high density insulation?
FOAMULAR® High Density Insulation has an outstanding thermal resistance of R-5 per inch, a strong compressive strength, and exceptional moisture resistance, making it an excellent insulation choice for use in high-load applications. Manufactured using Owens Corning`s patented HYDROVAC® technology and is GREENGUARD Gold certified.
How much does Owens Corning Foamular cost?
As low as $63.23/board Owens Corning™ FOAMULAR® 400 is a high strength extruded polystyrene (XPS) insulation product designed for use in engineered applications requiring additional load-bearing capability such as under slab, concrete floors, foundations, roadways and rail beds, plaza and parking decks and cold storage installations.