How deep are water wells in Massachusetts?
100-400 feet
Many drilled wells in Massachusetts penetrate 100-400 feet into bedrock.
How far deep is the water table?
Although the water table varies throughout the Oglalla Aquifer, it is generally 15 to 90 meters (50 to 300 feet) below the land surface.
How do I find out my well depth?
How to Measure
- Lower until you feel slack. Note, you may feel some bouncing as you pass the pump depending on the space from the casing to the weight on the measuring line.
- Mark the line at the top edge of the casing.
- Pull out and measure. This is your well depth – the distance to the bottom of the well shaft.
How deep are wells in New England?
about 100 feet to 500 feet
Throughout New England, water is often found at about 300 feet, but wells for household use usually range from about 100 feet to 500 feet deep. There are some places, however, where a well can be more than 1,000 feet deep.
How much does it cost to drill a well in MA?
Drilling a residential water well costs $25 to $65 per foot or $3,750 to $15,300 on average for a complete system and installation. Prices include the drilling, a pump, casing, wiring, and more.
How far do you have to dig to find water?
On average, to be deep enough to reach the bedrock, a water well would need to be anywhere from 100 to 500 feet deep, though there are some places where the well needs to be up to 1000 feet deep.
How do I know if my water table is high?
A telltale sign of a high water table is if your neighbors experience similar flooding issues or if your home is near a water source such as a lake, river, or marsh.
How do you know if there is water in your land?
Public water is commonly provided by a governmental entity or water company. To find out whether public water is available, look at the details of the sales listing for the land or talk to the seller or a real estate agent (if one is involved).
How can you tell if water is underground?
Look at your water meter for the leak indicator, which is often a small red, white, or blue triangle. The indicator spins when the house is using water. Because you shut off all water to the home, the triangle should be still. If it’s spinning, you have a leak underground.
Can you dig your own well in Massachusetts?
Who can drill a well? As required by 310 CMR 46.00, only Massachusetts Registered Well Drillers are permitted to install wells in the Commonwealth. This includes all well construction types, for both potable and non-potable purposes.
Can I dig my own well in Massachusetts?
What zone is groundwater located?
Groundwater is found in two zones. The unsaturated zone, immediately below the land surface, contains water and air in the open spaces, or pores. The saturated zone, a zone in which all the pores and rock fractures are filled with water, underlies the unsaturated zone.
How do I explore Massachusetts lakes and ponds?
Explore Massachusetts lakes and ponds! MassWildlife’s pond maps provide bathymetry (pond depth), shore and boat access, and the types of fish found in the water body. Use this page to search by map or by list. How it works: Click on any of the dots on the map for a pdf map and write-up.
Where can I find information about fishing in Massachusetts?
Visit the Go Fish MA! map for even more fishing information. Get all MassWildlife’s freshwater fishing information in one place—featured sites, boat ramps, trout stocked waters, pond and lake summaries, and digital depth information.
Where can I find depth-to-water measurements for my area?
The USGS National Water Information System (NWIS) has depth-to-water measurements made in the present and the past. A convenient way to find data for your area is by using the NWIS Mapper and selecting “Groundwater Sites” in the menu on the left.
Where can I find water data for my area?
Manual measurements of depth to water in wells. The USGS National Water Information System (NWIS) contains extensive water data for the nation. Public access to many of these data is provided via the USGS Water Data for the Nation site (additional background).