How deep should fence posts be in Ontario?
36 inches
The posts are set deep enough to go below the frost line – 36 inches is the minimum depth, 48 inches is better. The posts are plumb. The top of the fence is level and the fence is in a straight line.
How deep does a hole need to be for a post?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole. Then compact and level the gravel using a post or 2×4.
How much does it cost to dig a post?
Dig a post hole: national average cost
| cost to dig a post hole | |
|---|---|
| National Avg. Cost (labor) for 1 hole | $74.36 |
| National Cost Range (labor) for 1 hole | $42.24 – $106.48 |
How deep is the frost line in Ottawa Ontario?
Due to Ottawa’s 3.5ft frost lines we consider that to be our desired depth. For decks, we attempt to reach 4-5ft. For fencing, our footing depths range from 3-4.5ft.
How many post holes can you dig in a day?
Augers are very powerful machines with a lot of torque that can throw you like a sack of potatoes if the auger bit encounters a rock or a root. If your soil is loamy or sandy, you too can drill 30 holes in a day’s worth of rental.
How deep do footings have to be in Ontario?
Depth of Footings Footings should extend to a minimum depth of 12 inches below previously undisturbed soil. Footings also must extend at least 12 inches below the frost line (the depth to which the ground freezes in winter) or must be frost-protected.
Is 3 feet deep enough for fence posts?
As a general rule of thumb one-third of your post should be underground, the other two-thirds above. Let’s take a standard 6foot (72 inches) fence as an example. You will need a 9foot (108 Inches) post so that 3ft (35 inches) can be underground and 6ft can be above ground.
What is perfect post hole?
Formally known as Perfect Post Hole, we have been in the post hole, fence & deck business since 1989. We machine auger post holes & set posts in concrete with a 2 year warranty of post heaving. We install piers for any type of deck or building extension/addition.
What can post hole pro do for You?
We also serve homeowners that are trying to get a head start on their own fence and deck projects. Post Hole Pro digs over 10,000 holes per year. Let us save you the hassle of digging your own holes.
Do you machine auger post holes in concrete?
We machine auger post holes & set posts in concrete with a 2 year warranty of post heaving. We install piers for any type of deck or building extension/addition. We machine auger holes from 6″ to 24″ in diameter up to 6′ deep.
How much does it cost to dig a 4 foot hole?
The average cost is $25.00 per hole depending on the size, location and type of project. Post/footing setting prices will depend on The gas powered GD7200 auger powerhead has a 71 cc engine and is capable of digging 4 foot holes.