How do I access a mikrotik router?
To connect to the router enter IP or MAC address of the router, specify username and password (if any) and click on Connect button. You can also enter the port number after the IP address, separating them with a colon, like this 192.168. 88.1:9999. The port can be changed in RouterOS services menu.
What is the default IP address for mikrotik router?
192.168.88.1/24
Every router is factory pre-configured with the IP address 192.168. 88.1/24 on the ether1 port. The default username is admin with no password.
How can I change my mikrotik WIFI password?
Passwords for wireless interfaces on Mikrotiks are stored under Wireless > Security Profiles. By default, all wireless interfaces will share the same security key /preshared key / password. Just double-click on the security profile name you want to edit, enter the new password, then press ‘Ok’.
How can I change my mikrotik WiFi name?
In this guide you’ll see how to change it on Mikrotik’s router.
- Open Winbox.
- Choose Wireless.
- Double click on wlan1.
- Find SSID bar. You can change your WiFi name whatever you want. After setting it up click Apply and its Done! Category.
How do I reset my mikrotik router to factory settings?
Mikrotik Factory Reset Guide
- Disconnect the power cord from the unit.
- Hold the reset button and do not release.
- Plug the power cord in and wait until the ACT light starts flashing.
- Now release the button to clear configuration.
- Wait for a few minutes for the router to clear and restore the factory settings.
How do I reset my MikroTik to factory settings?
Why can’t I log into my MikroTik router?
Re: I can`t log in to the Mikrotik Try logging through mac address, using winbox. If problem persists, check about some issues here http://forum.mikrotik.com/viewtopic.php?t=36156. If you’re using SO Windows, try run winbox as Administrator. If you have Virtual Box, try disable the virtual interfaces.
How do I reserve an IP address in DHCP mikrotik?
1) Connect the laptop to your network and get an IP from DHCP as usual. 2) Go into the Mikrotik’s IP > DHCP-Server menu and click on the leases display. 5) Click that button and you’re done.
How do I access my Hap ac2 router?
Once connected to the wireless network, open https://192.168.88.1 in your web browser to start configuration, since there is no password by default, you will be logged in automatically. Set up your password in the screen that loads.