How do I access my HP command line?
When moving between interfaces, the switch retains the current privilege level (Manager or Operator). That is, if end-user are at the Operator level in the menu and select the Command Line Interface (CLI) option from the Main Menu, the CLI prompt appears at the Operator level.
How do I know what HP switch I have?
Solution:
- Launch the Web UI of the Switch, and look for the Version: located within the contents of the Identity tab.
- Via a Telnet or serial console session, issue one of these two commands from within the CLI.
How do I enable SSH on HP switch?
Instructions
- Connect to the switch via CLI.
- To enable SSH, enter the following commands: console>enable. console#config.
- To disable telnet, enter: console(config)#no ip telnet server.
- To enable HTTPS, enter the following commands” console(config)# console(config)#crypto certificate 1 generate key-generate.
How do I check logs on HP switch?
To display the Event Log from the Main Menu, select Event Log . An event log display shows a sample event log display.
How do I telnet to an HP switch?
Access to the switch Event Log, operating system downloader, and other features….To begin a Telnet session to the switch console:
- Click the Configuration tab.
- Click Device View.
- Click telnet session to the switch console to open a telnet window displaying the switch’s CLI.
How do I enable SSH on my HP Router?
Configuring the switch for SSH operation
- Assign a local login (operator) and enable (manager) password.
- Generate the switch public and private key pair.
- Provide the switch public key to clients.
- Enable SSH on the switch and anticipate SSH client contact behavior.
- Configure the switch for SSH authentication.
How do I enable syslog on my HP switch?
How to configure syslog on HP ProCurve switches
- The date, time, and time zone are correctly set on the switch.
- You have Telnet or SSH credentials and access to the switch.
- The IP address of your Auvik collector is known. You can find this in the Syslog > Summary tab in the Export Information column.
How do I find the VLAN details on my HP switch?
Specifies a single port number or a range of ports (for example, a1-a16 ) , or all for which to display information. Displays detailed VLAN membership information on a per-port basis….Syntax:
| Port name | The user-specified port name, if one has been assigned. |
|---|---|
| VLAN ID | The VLAN identification number, or VID. |
How do I enable Web interface on HP switch?
To enable web login, log in to the device via the console port, and perform the following configuration: • Enable HTTP or HTTPS service • Configure the IP address of the VLAN interface • Configure a username and password The device supports the following web login methods: • HTTP login: • HTTPS login: The following …