How do I find my WWN number in Solaris 8?

Posted on by David Darling

How do I find my WWN number in Solaris 8?

Step 1 Run the fcinfo hba-port command to the HBA WWN in Solaris 10. Manufacturer: QLogic Corp. Manufacturer: QLogic Corp. Step 2 Run the prtpicl -v -c scsi-fcp |grep -i wwn command to view the HBA WWN in Solaris 8 and 9.

How do I run Fcinfo?

Steps

  1. If it is not already installed, download and install the fcinfo.exe program from the Microsoft Download Center.
  2. Open a command prompt and enter the following command: fcinfo /ports /details.
  3. Record the value of the Port WWN field for each HBA port.

What is WWN number in storage?

A World Wide Name (WWN) is a unique identifier assigned by the Institute of Electrical and Electronics Engineers (IEEE) to the manufacturers of network storage products. A manufacturer must include a WWN with all network storage devices. WWN is also known as World Wide Identifier (WWID).

How do I scan a LUN in Solaris 10?

Let’s see how we can re-scan the SAN/FC luns on solaris 10/11 hosts. To scan new FC luns, Just execute the below commands. “luxadm probe” also used to scan FC luns but i am happy to use cfgadm….

  1. List the connected HBA.
  2. Reset the HBA using forcelip option.
  3. Verify the controller status using “cfgadm -al”.

What is Fcinfo?

Fibre Channel Information Tool (fcinfo)

How do I get a WWN number?

Here is a solution to find WWN number of HBA and scan the FC Luns.

  1. Identify the number of HBA adapters. systool -c fc_host -v.
  2. To get the WWNN (World Wide Node Number) of HBA or FC card in Linux.
  3. To get the WWPN (World Wide Port Number) of HBA or FC card in Linux.
  4. Scan newly added disks or rescan existing LUNs in Linux.

What is LUN masking in storage?

LUN masking is an authorization mechanism used in storage area networks (SANs) to make LUNs available to some hosts but unavailable to other hosts.

How many bits is a WWN?

Switch WWN identifiers are a 64-bit number that has eight colon-separated fields each consisting of one or two hexadecimal digits between 0 and ff.

How do I find disk path in Solaris?

How to Monitor a Disk Path

  1. Become superuser or assume a role that provides solaris. cluster. modify RBAC authorization on any node in the cluster.
  2. Monitor a disk path. # cldevice monitor -n node disk.
  3. Verify that the disk path is monitored. # cldevice status device.

What is Luxadm?

The luxadm program is an administrative command that manages both the Sun StorEdge A5000 and SPARCstorage Array disk arrays. luxadm performs a variety of control and query tasks, depending on the command-line arguments and options used.

How can I check my HBA card in Server 2019?

Steps

  1. Open the Computer Management window. For.
  2. Double-click Device Manager. A list of installed devices displays.
  3. Expand Storage controllers and double-click the appropriate HBA. The Properties dialog box for the HBA is displayed.
  4. Click Driver.
  5. Obtain the latest supported version from the Emulex or QLogic website.

Where is WWN number in Windows 2019?

To locate the WWPN, perform the steps for the adapter you are using. After installing OneCommand Manager, to launch the application select Start > Programs > Emulex > OCManager. In the left panel, double-click on the host. It will expand to display the WWPN of the HBA installed on the host.

What is WWN storage?

A World Wide Name (WWN) or World Wide Identifier (WWID) is a unique identifier used in storage technologies including Fibre Channel, Parallel ATA, Serial ATA, NVM Express, SCSI and Serial Attached SCSI (SAS).

How do I use the fcinfo command?

The following examples show the most common administration operations that can be performed by using the fcinfo command: To list information of the HBA ports and their link statistics use the fcinfo hba-port -l command. To list all the remote ports on all the HBAs, use the fcinfo remote-port command.

How do I map Luns in Solaris?

This article is intended as a brief introduction to some of the commands in Solaris that will help you achieve your tasks. Firstly, in order to allow your storage admin to map you some LUNs, you’ll need to provide him with the WWNs of the HBA ports in your server. This is so he can map the LUNs you’ve asked for to the WWNs of your server.

What is fcinfo (1m)?

fcinfo – Collects and displays administrative information about FC-HBA ports on hosts, remote ports, and configured logical units. For more information, see the fcinfo (1M) man page.

What is fcinfo and fcadm?

fcadm [-?] fcinfo and fcadm are command line interfaces that collect administrative information on Fibre Channel host bus adapter (HBA) ports on a host. They also collect data on any Fibre Channel targets that might be connected to those ports in a Storage Area Network (SAN).