How do I fix IE error on LG front load washer?

Posted on by David Darling

How do I fix IE error on LG front load washer?

Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.

Why does my LG washer keep saying IE?

An IE error code in LG washing machines signals that the machine’s washer was not filled with water in the allotted time. This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others.

How do I reset my LG front load washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

Is there a reset button on LG front load washer?

How to reset the washing machine: Press POWER to turn the washer off. Unplug the washer from the power outlet or turn the circuit breaker to the unit off. With the power disabled, press and hold the START/PAUSE button for 5 seconds.

Can I reset my LG washer?

A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed.

What does the code Le mean on a?

The code LE means that the motor in your washer is locked. Sometimes this may simply be due to a wash load that was too heavy. However, in more severe cases it can indicate you have a failed rotor position sensor, a broken motor, or damaged sensor or motor wires.

How do you reset a LG front load washer?

How do you fix Le error on LG washer?

The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle. If the code appears again, let the washer sit for a half-hour so the motor has time to cool down before you restart the cycle.

How to fix LG top load washing machine gear box?

Drives the impeller that agitates the clothes during the wash cycle.

  • Rotates the spin basket in the spin portion of the cycle.
  • Shifts the drive system between the agitation and spin modes.

    • How to identify LG washing machine error codes?

    Turn off the washing machine and remove the plug from the wall socket.

  • Remove the top of your LG Washing Machine by removing the screws,holding them down,pulling the top backward,lifting it off,and placing it aside.
  • Remove the soap drawer entirely by pulling it out and unscrewing the components that hold it in place

    • How to clear LG washing machine ie error code?

    Check the water in a tap.

  • Check the shut-off valve which blocks the water supply to a washing machine.
  • Sometimes a stopcock is not closed fully.
  • Weak water pressure in the water supply system could also cause the fault: LG washer can’t cope with gaining of water in time.
  • It is possible that a water inlet hose is twisted or pressed down.

    • What are some common LG washer error codes?

    FE – Water Overflow Error

  • OE – Drains Slowly
  • IE – Inlet Water Supply
  • UE or UB – Unbalanced Load
  • CL – Child Safety Lock
  • LE – Locked Drive Motor
  • tCL – Tub Clean Cycle
  • dE – Door is Open
  • CE – Over Current in the Electrical Circuit
  • SUD – Suds Reducing Cycle