How do I install HP LaserJet p1102 wireless?

Posted on by David Darling

How do I install HP LaserJet p1102 wireless?

Go to Software and Driver Downloads, type your printer name, and then press Enter. Download the full feature software, and then follow the on-screen prompts to install and set up the printer on a wireless network. When prompted, restart your computer to finish the install.

How do I download and install HP LaserJet?

Method one: Download the printer software from 123.hp.com

  1. Connect the network cable to the printer and to the network.
  2. 2-line control panels: On the printer control panel, press the OK button.
  3. Go to 123.hp.com/laserjet.
  4. When the Download your installation software screen displays, click Download.

Why isn’t my HP LaserJet p1102 printing?

This HP LaserJet p1102w not printing with USB issue could occur if the printer is not configured properly on the network. Try resetting the printing system, but beware that this will remove any existing print queue and reset customized driver settings. Ensure your drivers are updated and try again to see if this helps.

How do I connect my HP Laserjet printer to WiFi?

Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)

  1. Place the printer near the Wi-Fi router.
  2. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.
  3. Select the name of your network, and then enter the password to complete the connection. Note:

How do I reset my HP LaserJet p1102 printer?

To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don’t release the two buttons until the printer stops making noise.

Is HP LaserJet P1102W compatible with Windows 11?

Windows 11 can’t install HP LaserJet P1102W Windows 10 driver – Microsoft Community.

How do I find the IP address for my HP Laserjet p1102w?

Disconnect the USB cable from the printer. Be sure “Print Test Page” is selected, then press the “Finish” button. The Windows Printer Test Page will print the DHCP-assigned IP address of the printer.