How do I reset my Plantronics Voyager Pro?
Plantronics Voyager Legend Reset: A How-To Guide
- Performing the Reset. Turn your Plantronics Voyager off. The on/off button is the slide switch on the back of the headset just above the charging contacts.
- Your Voyager should now be reset and ready to work with your Bluetooth devices. Turn it on to see if it works!
How do I reset my Plantronics Voyager headset?
Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.
How do you troubleshoot a headset?
Check if your headphones are connected to or paired with a different device via Bluetooth. If so, turn it off, plug in your headphones and see if they work again. Clean your computer’s headphone jack. Dust, lint and dirt may block the connection between the jack and the headphones.
How do I pair my Voyager Pro?
Press and hold the power button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the power button and set the headset aside. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset.
Why does my Plantronics Bluetooth headset keep disconnecting?
Low Battery. Chances are your wireless headset runs on a permanent rechargeable battery. If the headset has low battery power left, it might experience issues keeping a stable connection, hence the constant disconnections. Charge your headset for at least 15 minutes and try connecting it to the device again.
How do I fix my headphones when only one side works?
How to fix earphones when only one side is working
- Straighten out the earphone cord.
- Try another pair of earphones.
- Clean the headphone jack.
- Restart the device.
- Check the device audio settings.
- Check for the earphone damaged wires.
What is wrong with my headphones?
In the case of wired headphones, to test the sound, try plugging your headphones into a different jack. If the distorted noise goes away or becomes softer, it means that the jack is damaged. Also, try moving the ear cups up and down to see if the audio quality shows improvement, for wireless headphones.
Why does my headset randomly disconnect?
Why does my headset keep cutting out?
If your headphones keep cutting out, check your headphone jack and make sure the connection is good and the port is clean. It’s possible there is a problem with the audio driver on your device. If you think this might be the case, try uninstalling and reinstalling the driver.
Why does my left headphone not work?
1. Test and Repair the Earphone Cable. The first attempt you should make when your left earphone stops working is to test the cable. Your earphone’s tiny cable can be tested by inserting the earphone plug into your smartphone and make several bends with your fingers to detect a possible point of a cable break.
How to fix Plantronics headset Echo?
Turn the “Microphone Boost” option off.
How to pair Plantronics Voyager?
– Turn on your phone’s Bluetooth feature. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone’s user guide for more information. – Turn the headset on. Press and hold the power button until the indicator LED flashes red/blue. The Voyager Pro headset is now in pairing mode. – Use the commands on your phone to locate your headset. For most phones, select Settings/Tools > Devices > Bluetooth > PROPlantronics. See your phone’s user guide for more information. – If prompted for the Passkey (PIN code), enter 0000. Pairing is successful when the indicator on your headset flashes blue. Your headset is now connected and ready to use. – Your phone should now be paired with the Plantronics Voyager Pro headset and ready for use. 2021 Headset Buyers Guide Continue
How to setup Plantronics headset?
Objective. This article shows how to set up a Plantronics wireless (BT) headset in Microsoft Teams Voice on a computer.
How to fix a Plantronics Bluetooth?
Make sure Bluetooth is turned on. You should see the little Bluetooth symbol at the top right of the screen if you have an Android device.