How do I setup my NTT router?

Table of Contents

If you don t have LAN cable, see wireless set-up instruction first and connect your PC to the NTT device wirelessly. Turn on the computer, open the internet browser such as Internet Explorer, Google Chrome, Firefox, Safari, and enter http://192.168.1.1/ or http://ntt.setup/ , and hit Enter.

How do I configure my Fibre router?

Microsoft 365

Open up the box. In the box you should have:
Plugging in your fibre router.
Connecting your desktop/laptop to your Fibre Router.
When prompted you change the admin password.
Product username and password.
Change your WiFi Network name and password.
Complete the setup.
Check your Internet connection.

How do I connect my router to my Ebox?

To connect your equipment, start by screwing the cable wire onto the modem. Then plug one end of the Ethernet wire provided into your modem’s LAN port and plug the other end into the router’s WAN port. Then, connect the router’s power supply to a power source.

What is Flets IPv6 service?

This service enables ISP to provide native IPv6 internet connection with its telecommunication services (VNO) to its members who are using NTT East/NTT West FLET’S Hikari Next or FLET’S Hikari Light. There is no need for the ISP to set up its own telecommunication facilities.

What is PPP light on modem?

PPPoE, or PPP over Ethernet, is a standard way to connect to an ISP using a DSL modem. It allows you to connect your modem to a computer or router using a high-speed Ethernet port. The modem then establishes a point-to-point connection with the ISP.

How do I get to my router settings?

Open a web browser, type your router’s IP address in the address bar, then press Enter. Enter your router’s user name and password. You’ll then be logged into the router’s admin page. From here, you can view and change your network settings.

Why is Ebox not working?

Rebooting your equipment. If the problem is not due to a power supply problem or a payment issue, perform a sequential reboot if you are a cable internet subscriber. This reboot often fixes the technical glitches. Disconnect the power supply from your modem, router and telephone adapter, then wait 10 seconds.

How do I reset my Ebox?

Settings button on your remote. Select the Device preferences option, then About . Then, select Restart and Reboot . Your TV box will reboot.

What is PPPoE IPv6?

Point-to-Point Protocol Over Ethernet (PPPoE) for IPv6 provides the ability to connect a network of hosts over a simple bridging access device to a remote Access Concentrator in the IPv6 network. Each host utilizes its own Point-to-Point Protocol stack and the user is presented with a familiar user interface.

How do I test PPP connection?

Hold the Windows key on your keyboard and press the ‘x’ key, and then click on ‘control panel’. Under ‘Network and Internet’, click ‘view network status and tasks’. Click on Set up a new connection or network. Select ‘Connect to the Internet’ and then click the ‘Next’ button.

How do I setup a wireless router without cable?

Go to the router’s Network setup or LAN setup area and look for a section with “DHCP” in its title, and then disable DHCP if it’s on. Connect the bridge router to the main router. If both routers have WPS buttons (most do these days), you can press that button on both routers to connect them wirelessly.

How do I set up my NTT box?

The basic configuration is usually as follows; The ethernet cable that comes from the NTT box should go into the WAN/Internet socket on the back of the router. You should then be able to connect the computer to one of the LAN sockets (sometimes labeled as simply numbers, e.g. 1, 2, 3) on the router.

Can I use my own router with an NTT device?

It’s possible that the NTT device you have been provided with can also act as a router and will have multiple LAN sockets on the back of it, e.g. the NTT PR-S300NE device. These devices are usually sent out in “Bridge mode” meaning you do not need to configure this device and can use your own router.

How do I connect my computer to a Rakuten broadband router?

You should then be able to connect the computer to one of the LAN sockets (sometimes labeled as simply numbers, e.g. 1, 2, 3) on the router. Once you have connected the computer to the router, you will need to setup the connection ID and password from Rakuten Broadband Premium in the router. The type of connection is known as a “PPPoE Connection”.