How do I sync my AcuRite thermometer?
Synchronize the units:
- Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
- Change A-B-C switch on both units to a new matching A-B-C channel then press and hold the reset button on the display for 20 seconds.
How often does AcuRite thermometer update?
every 10-30 seconds
A display unit receives an update from your sensor every 10-30 seconds. Manually refreshing the browser or app will not force a sooner update. The update interval always remains at 5 minutes.
How do you connect AcuRite?
- 1 INSTALL SENSOR BATTERIES. In the outdoor sensor battery compartment, install four AA alkaline or lithium* batteries.
- 2 PLUG IN DISPLAY AND CONFIGURE.
- 3 MOUNT SENSOR. Find a suitable place outdoors to mount the AcuRite Iris.
- 2 ACCESS WI-FI SETUP PAGE.
- 3 ADD YOUR WI-FI CREDENTIALS.
- 4 SET UP YOUR MY ACURITE ACCOUNT.
What frequency does AcuRite weather station use?
433 MHz
433 MHz Wireless Technology AcuRite wireless products use a 433 MHz wireless frequency because it offers the following benefits: Optimal performance in places that are crowded with electronic signals.
How do I set my Acurite?
What frequencies do weather stations use?
All NOAA Weather Radio stations broadcast on one of seven frequencies in the VHF Public Service band: 162.400 megahertz (MHz), 162.425 MHz, 162.450 MHz, 162.475 MHz, 162.500 MHz, 162.525 MHz, and 162.550 MHz.
How do I calibrate my outdoor thermometer?
The easiest calibration is to the temperature of freezing water, 32° F. Fill a glass with half ice and half water and let it sit for up to 15 minutes. Then, put the thermometer’s probe in the glass, at least one inch. It should read 32°F or 0° C.
How do I change the settings on My AcuRite weather station?
Press the “ ” button, located on the back of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “▲” or “▼“ buttons (press and HOLD to fast adjust).
Why is my Acurite thermometer not working?
If you’re having this issue, you might not have synced them correctly or you may need to re-sync them. Turn off both units and take out the batteries and power cord. Then, place the units next to one another. Change the A-B-C switch to a new letter on both units.