How do you remove a Danze Parma cartridge?
Danze – How to remove Parma handle?
- Pull out the rubber button (part #1).
- Use a hex wrench (part #4) to unscrew counter-clockwise to loosen the set screw (part #2). The hex wrench is 2.5 mm head or 1/8″.
- Then pull out the main handle (part #3). If still hard to be pulled away, loosen the set screw again.
How do you change a Danze shower cartridge?
Hold the stem of the cartridge and pull up until the cartridge is completely removed from the faucet body….Danze – How To Install A Cartridge – Tub / Shower – 1 Handle – Pressure Balanced – Ceramic Disc Cartridge
- Remove the old cartridge.
- Install the new cartridge.
- Test for leaks.
How do you remove the cartridge from a Danze kitchen faucet?
In order to remove and install a cartridge, you will need to:
- Turn the water supply off to the faucet.
- Remove the handle.
- Remove the cartridge.
- Install the new cartridge.
- Test for leaks.
How do you take apart a Danze faucet?
Handle type 1:
- Pull out the rubber button located on the bottom of faucet handle.
- Use a hex wrench (part #1) to unscrew counter-clockwise to loosen the set screw. The hex wrench is 2.5 mm head or 1/8″.
- Then pull out the main handle (part #2). If still hard to be pulled away, loosen the set screw again.
How do you fix a leaky Danze faucet?
Replace the gaskets, springs and the ball if it’s damaged. Put everything back together and you’re done. If a Danze faucet is leaking from the handle, all you should have to do to stop the leak, according to the Danze website, is tighten the valve retaining nut. This may also stop leaking from the spout.
How do I know what Danze shower cartridge I have?
Since 2010 Danze has put a label on faucets to help identify the product after installation. Look for labels on the underside of the handle canopy, attached to the supply hose, attached to in-wall valves, or behind the valve escutcheon on in-wall valves.
Where is the cartridge in a faucet?
Unscrew the nut with an adjustable wrench. The plastic cylinder with a stem on top is the faucet cartridge.
How do I fix my Danze faucet?
How do you remove a Danze faucet handle?
Danze – How to remove Opulence handle?
- Use a hex wrench (part #4) to unscrew counter-clockwise to loosen the set screw (part #1). The hex wrench is 2.5 mm head or 1/8″.
- Then pull out the main handle (part # 2).
- You can leave the lever (part #3) and pull the entire handle assembly out.
Where is the model number on a Danze faucet?
Where can I find the model number of my Danze faucet?…Locations for labels:
- The underside of the handle canopy.
- Attached to the in-wall valve.
- Behind valve escutcheon on the in-wall valve.
What is the difference between a valve and a cartridge?
Turning a conventional stem valve’s handle causes a rubber washer to compress against, or release from, a hole that supplies water to a spout or showerhead. Faucet cartridges replace the metal stems with a lightweight plastic body that turns smoothly and doesn’t require excessive turning to close.