How do you replace the fuser in a Brother printer?
Follow the steps below:
- Press the Power button to turn off the printer.
- Open the Top Cover.
- Unscrew the two long screws as shown to release the Fusing unit from the printer.
- Remove the Fusing Unit from the printer by holding the handles on both sides.
- Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.
How long does a Brother fuser last?
The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.
How long does a fuser kit last?
between 50,000 and 200,000 pages
Most fusers last between 50,000 and 200,000 pages, depending on the design. Smaller cheap printers tend to have short fuser lives, while fusers used in larger office printers tend to be long-lasting and easily replaced.
When should I replace my fuser?
When should we replace a printer’s fuser?
- The print leaves parallel spots across a sheet.
- The printer begins to loosen toner and does not stick to the sheet.
- Stains on printed sheets.
- Annoying noise from gear wear.
- No heating due to lamp failure.
- The printer simply stops printing even though the paper goes all the way.
What is a fuser for Brother printer?
The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message ‘Replace Parts Fuser Unit’ will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.
How do I change the fuse unit on my Brother printer?
Open the Top Cover. Unscrew the two long screws as shown to release the Fusing unit from the printer. Please wait for 30 minutes after installing a new Fusing Unit the oil circulates completely through to the Heat Roller. If you begin using a new Fusing Unit immediately, poor print quality may result.
How do I reset the drum counter on my brother dryer?
Put the drum unit and toner cartridge assembly back into the machine. When you replace the drum unit with a new one, you need to reset the drum counter. Reset the drum counter only when you replaced the drum unit with a new one. Hold down Go until the Drum Clear message is displayed on LCD, then release Go.
How do I change the toner cartridge on my Brother Sewing Machine?
Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. Hold the handle of the toner cartridge and slightly push it to unlock. Then pull it out of the drum unit.
How do I unlock the toner cartridge on my brother dryer?
Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. Hold the handle of the toner cartridge and slightly push it to unlock.