How do you reset the toner on a Brother DCP 7065dn?

Posted on by David Darling

How do you reset the toner on a Brother DCP 7065dn?

Brother DCP7065DN Toner Reset

  1. Open the front door and remove the drum and toner (cover to avoid light damage).
  2. Press the clear key and confirm that the display shows replace drum.
  3. Press the start key and confirm that the display is clear.
  4. Press the down arrow key, then quickly press the up arrow key and.

How do you reset the drum on a Brother DCP 7065dn?

How to reset the drum counter:

  1. Open the front cover of the printer and push “clear” on the printer display.
  2. Confirm you are installing a new drum unit by pressing the up arrow.
  3. “Accepted” should appear on the LCD display, now you are ready to print!

How do you reset the toner on a Brother DCP 7055?

Have to do the key sequence fairly quicklyor it defaults back to the “COVER IS OPEN” message.

  1. Open the front door to access the toner.
  2. Press the “Clear” button.
  3. Press the “Start” button.
  4. Press the “↓” or “Down Arrow” button.
  5. Press the “↑” or “Up Arrow” button.
  6. Press the “OK” button.
  7. Close the front door.

Is there a way to override low toner on Brother printer?

  1. Open the front cover of the printer.
  2. Press the Clear / Back button.
  3. Press the * button.
  4. Press the 0 button.
  5. Press the 0 button.
  6. Close the front cover.
  7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do you clear toner end?

The toner cartridge must be replaced to continue printing. Install a new genuine Brother TN420 or TN450 toner cartridge. When replacing the toner cartridge, you MUST install a brand new, unused genuine Brother toner cartridge in order to reset the “Toner Ended” status.

How do I reset my brother DCP b7500d?

Reset the Drum Counter

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Up arrow key to reset the drum counter.

How do I reset my toner counter?

Press the START button. Install the toner & drum back into the printer. Press the START button twice and close the front cover. The warning message should now be clear.

How do you reset the drum on a Brother HL 3170?

Brother HL-3170CDW – Reset Drum

  1. Press the Up arrow key while holding down “Go” on the printer’s control panel.
  2. Press the Up or Down arrow key to display Drum Unit.
  3. Press the Up or Down arrow key to display the colour of the drum unit that you replaced.
  4. Press the Up arrow key for “Reset” to reset the drum counter.