How much horsepower does a Dodge 318 engine have?
230 hp
The 318 (5.2 Liter V-8) The power ratings of the new LA-series 318 were exactly the same as those for the old polyspherical-head design, 230 hp and 340 lb-ft.
What motor is the 318 Dodge?
The 5.2-liter Chrysler LA 318 was a small-block gasoline V8 engine that was produced between 1967 and 1991. The 318 V8 was part of Chrysler’s popular LA engine series, which also included the 238 V6, the 273 V8, the 340 V8, and the 360 V8. This engine is also known as the Dodge 318 and the Dodge 5.2-liter V8.
What vehicles had a 318 engine?
The Plymouth Valiant, Barracuda, and Duster, as well as the Dodge Dart, offered a 318 in their lineup and the true abilities of the engine started to shine. The lightweight V8 offered a performance V8 sound and feel that matched the lightweight body and frame of the compact A-body cars, making it a perfect fit.
Is Dodge 318 a good motor?
The 318 engine is absolutely the best all-around small block Mopar, in my opinion. It can easily make 400-plus horsepower and still has great street manners. If you’re building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.
Who made the 318 engine?
Chrysler Corporation
The LA engines are a family of pushrod OHV small block 90° V-configured gasoline engines built by Chrysler Corporation. It was factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications from 1964 through 1991 (318) & 1992 (360).
Are Dodge 5.2 a good MOtor?
5.2 Magnum Reliability The 5.2 Magnum used in Dodge trucks and Jeeps is a pretty solid engine. It doesn’t suffer cylinder head cracks to the same extent that the 5.9 Magnum does. Additionally, the internals and major engine components seem to be fairly strong and adequate for good longevity at stock power levels.
Is a 318 A small-block?
The other side of a decent quench quest is the cylinder heads, but the majority of small-block Mopar heads are of the open-chamber design, limiting our choices in production heads….A 400hp Bolt-Together Chrysler 318.
| Dyno Results | ||
|---|---|---|
| Mopar 318 | ||
| 6,000 | 398 | 348 |
| 6,200 | 400 | 339 |
| 6,500 | 393 | 318 |
Is the Dodge 5.2 reliable?
Are Dodge 318 engines good?
The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.
Is the 318 motor a big block?
Most commonly known as the “wide-block 318,” “big-block 318,” or “Poly 318,” official Chrysler nomenclature describes it as the A479 or A-series 318.
Is the 318 a good engine?
What are the specs of a Dodge 100 318 motor?
Spark Plugs. The 318 was equipped with type N14Y spark plugs.
How much horse power does a 318 Dodge have?
How much horsepower does a 318 Dodge motor have? The 318 four-barrel, used on police pursuit and other cars, produed 165 hp and 240 lb-ft of torque. What cars had the 318 engine? The 318 engine first was used in the Dodge Dart, the Dodge Demon, the Plymouth Barracuda, the Scamp, and the Duster.
How much HP does a 318 motor have?
The 318 had a 3.91-inch bore and 3.312-inch stroke. Its compression ratio in 1968 was a hefty 9.1:1, but was reduced to 8.6:1 by 1973 in the interest of fuel economy. It was equipped with a two-barrel carburetor and generated 230 horsepower at 4400 rpm and 340 foot-pounds of torque.
What are the timing degrees on a Dodge 318?
While timing a 1988 318 Dodge Ramcharger engine, the hood label says 10*BTDC but the marks go from 5 before and 5 after. While timing a 1988 318 Dodge Ramcharger engine, the hood label says 10*BTDC but the marks go from 5 before and 5 after. – Answered by a verified Dodge Mechanic