How much is a trotec speedy 360?
Laser Engraver Comparison Chart
| Model: | Gravotech LS900 | Trotec Speedy 360 |
|---|---|---|
| Market Price | $18,000+ | ~$26,000 |
| Laser Print Source | CO2 | CO2/Fiber |
| Laser Power | 40/60/80W | 40 – 120W (CO2) 12 – 50W (Fiber) |
| Engraving Area | 24” x 24” | 32” x 20” |
Where is trotec laser made?
Where you can find us worldwide. We’re a leading international developer and manufacturer of laser machines with headquarters in Marchtrenk, Austria.
How much is a laser engraver?
Budget. The price for an ideal cutter and engraver may be anywhere from $100 to $10,000 (or more for industrial models). The general rule is that the more expensive the unit is, the higher its laser power and therefore the better it can cut through materials. However, you should always consider your needs.
What can a 30w fiber laser do?
Besides same marking ability, 30w can also do better engraving. For cutting, most of customers cut gold and silver. 30w also has much good performance on that. It can cut maximum 0.7mm silver and 1mm gold.
How deep can a 30w fiber laser engrave?
0.3MM
Technical Parameters
| Laser Type | Fiber Lasers |
|---|---|
| Laser Power | 30W |
| Engraving Speed | <9000MM/S |
| Engraving area | <110x110mm or 200x200mm |
| Engraving Depth | less than or equal to 0.3MM |
What can a 30W laser cut?
Power
- ~30 W can cut 3-4 mm with 1-3 passes before charring begins.
- ~40 W cuts 5-6 mm with 1-3 passes.
- 50-60 W will easily cut 10 mm with 1-3 passes and can cut denser woods.
- 75-120 W cuts 13 mm with 1-3 passes but starts to leave a noticeable kerf angle.
How deep can a 30W fiber laser cut?
Technical Parameters
| Laser Type | Fiber Lasers |
|---|---|
| Laser Power | 30W |
| Engraving Speed | <9000MM/S |
| Engraving area | <110x110mm or 200x200mm |
| Engraving Depth | less than or equal to 0.3MM |
How deep can a 30w laser cut?
With 30w fiber laser engraving machine we can make more than 1mm depth. Due to carbon steel and stainless steel is very hard, it will take much more long time when we need do deep engraving. Usually 0.5mm is ok for 30w laser.