Is Cisco 3750 A EOL?
Cisco Catalyst switch models have reached the end of their support life. As of July 31, 2015, Cisco no longer provides support for the Cisco Catalyst 3750 24- and 48-port 10/100 switches or the Catalyst 3560 24- and 48-port 10/100 switches.
How do you reset an Ethernet switch?
The easiest way to reset the switch to its factory default settings is to look for its reset button located on the front panel, then press and hold for more than 10 seconds. You can also do it through the web interface of the switch.
Do you still need a router with a layer 3 switch?
Additionally, designed specifically for use on intranets, a layer 3 switch usually has no WAN ports and features a traditional router usually gets. So layer 3 switch is most used to support routing between VLANs.
Do Layer 3 switches have IP addresses?
Layer 3 switches have separate IP addresses on individual interfaces. Some devices have a factory default, such as 10.157. 22.154, used for troubleshooting during installation.
Is REP supported on Catalyst 3750-X switches?
Note REP is supported on Catalyst 3750-X and 3560-X switches running the IP Base license and the IP Services license. REP is not supported on the LAN Base license.
How many rep ports can be configured on an EtherChannel?
Configuring different values on ports at each end of the link results in a REP link flap. REP ports cannot be configured as one of these port types: REP is supported on EtherChannels, but not on an individual port that belongs to an EtherChannel. There is a maximum of 64 REP segments per switch.
How do I set the default VLAN for the Rep interface?
The default is VLAN 1. To set the admin VLAN to 1, enter the no rep admin vlan global configuration command. Returns to privileged EXEC mode. Verifies the configuration on one of the REP interfaces. (Optional) Saves your entries in the switch startup configuration file.