Is it okay to mix RAM with different latency?
It is possible to mix different RAM brands; however, motherboard manufacturers suggest using RAM that matches the model type, size, frequency, latency, and manufacturer to receive the best stability and performance. Even if the specs do not match, you will still be able to utilize the RAM together.
Can you mix faster and slower RAM?
While you can technically mix speeds, there is one important thing to note: your DRAM would all run at the speed of the slowest module. For example, if you have a DDR3 1333MHz system and install a second module at 1600MHz, they would both run at the 1333MHz speed.
Can I use two different rams CL?
You should try. If they work, it is fine. If they don’t go into the BIOS and set them on the same setting i.e CAS and Frequency.
Is RAM speed more important than CAS latency?
So to put everything together and answer the classic question, speed is more important. The best way to optimize RAM performance is to install as much memory as possible, use the latest memory technology, and choose modules with the right amount of speed for the applications you’re using.
Can I pair 3000mhz with 3200mhz RAM?
Yes, it’s ok. Assuming this is JEDEC RAM (which it almost certainly is for laptop RAM) the faster RAM will run at 2933MHz to match the other stick.
Does RAM speed need to match?
These six myths are the most common ones you’ll read regarding RAM. You can do a lot with RAM: mismatched sticks, different speeds, different sizes, and so on. For the most part, you’ll just end up with a slower computer. Still, it is always best to match your RAM sticks.
What happens if you put faster RAM with slower RAM?
Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.
Can you mix cl17 and cl15 RAM?
Technically yes but it’s not recommended. Firstly you could experience instability or even BSOD’s. And secondly Dell has a reputation of mixed ram incompatibilities meaning the laptop might not even boot. I’d recommend getting the same model RAM, but if you realllly need the upgrade at cheap you could give it a try.
Can I mix cl15 and cl16 RAM?
You can Mix different sizes not recommended. It’s also not recommended to mix chips on both sides with chips on 1 side. It is recommended to have same Speed same Latency, and should have the Same Voltage, Even with my ultra expensive EVGA X99 motherboard it’s recommended to have same voltage on the RAM.
Can you mix 3200mhz and 3600mhz?
If you pair faster ram with slower ram, it will run at the speed of the slower ram. Honestly though for a Ryzen 5 3600, 3200mhz ram should be fine (Hardware unboxed did a big memory scaling test and they found tweaking your timings on 3200mhz ram resulted in same performance as 3600mhz ram).
Is there a big difference between 2666MHz and 3200mhz?
So for general use and gaming, I wouldn’t say there is any noticable difference between 2666MHz and 3200MHz RAM, except for benchmarks. But for applications and tasks relying heavily on RAM, more than gaming does, faster memory would likely be an advantage.
Can I use 2 different pairs of RAM?
It’s a common misconception that you can’t pair two different RAM sizes in your system. It’s possible to use two or more different RAM sizes, but it has a downside. Same-sized RAM sticks are programmed to work together in a state called flex mode or dual-channel mode whenever possible to reach the best performance.
What happens if I use RAM of a faster speed than the motherboard supports?
Can I use 3200MHz in 2666MHz motherboard?
Yes. Throw the memory in and try the XMP profile…it may even run faster than 2666.
Can I mix CL15 and CL16 RAM?
Can I use CL16 and cl18 RAM together?
It shouldn’t endanger any of your hardware, because ideally it wont work to begin with. Mixing RAM is hit or miss. You would need to adjust the settings of the faster sticks to match the slower ones (that’s every setting; latency, speed, timings, voltage etc) to even have a chance at them working together.
Is CL15 RAM faster than CL16?
The difference is that the CL15 uses 15 clock cycles until an operation is performed, and CL16 uses 16 clock cycles to perform an operation, so the CL15 has a slightly better edge to it. If your motherboard will accept it, try to upgrade from 2400MHz.
What is the difference between DDR4 RAM speed rating and CAS latency?
Example: if the speed rating of a standard module and a gaming module is the same (i.e. DDR4-2666) but the CAS latencies are different (i.e. CL16 vs. CL19), then the lower CAS latency will provide better performance.
What is the CAS latency of a 16GB RAM?
For example, let’s say that one set of RAM modules are 16GB CORSAIR DDR4 3200 MHz with a 16 CAS latency. The other RAM module set is a 16GB TEAMGROUP T-Create Classic DDR4 2666 MHz with a 19 CAS latency.
Can I use two RAM modules at different speeds?
It is entirely possible to operate two or more RAM modules at different speeds. However, just like mixing brands, you will default to the lowest-performing RAM modules. For example, let’s say that one set of RAM modules are 16GB CORSAIR DDR4 3200 MHz with a 16 CAS latency.
What is the difference between CAS latency and latency?
Example: if the speed rating of a standard module and a gaming module is the same (i.e. DDR4-2666) but the CAS latencies are different (i.e. CL16 vs. CL19), then the lower CAS latency will provide better performance The difference between the perception of latency and the truth of latency comes down to how latency is defined and measured.