What are Aironet Extensions?
The Cisco Aironet Extensions Information Element (IE) is an attribute used by Cisco devices for better connectivity. It contains information such as the AP name, device type, radio type, AP load, and the number of associated clients, in the beacon and probe responses of the WLAN.
Does FlexConnect use CAPWAP?
Operation Modes There are two modes of operation for the FlexConnect AP. Connected mode: The WLC is reachable. In this mode the FlexConnect AP has CAPWAP connectivity with its WLC.
What is CCX Cisco?
The Cisco Compatible Extensions (CCX) Specification describes a list of functional extensions to the IEEE 802.11 Wireless LAN standard to support fast roaming (CCKM) with upgraded security, reliability, and diagnostic performance.
What is coverage hole detection?
A coverage hole is detected if both the number and percentage of failed clients meet or exceed the values entered in the coverage level global and coverage exception global commands over a 90-second period.
What is the difference between FlexConnect and local?
Locally switched means the traffic is terminated at the local switch adjacent to the access point. Flex Connect also known as HREAP by the old timers, allows data traffic to be switched locally and not go back to the controller. It basically causes the AP to behave like an autonomous AP, but be managed by the WLC.
What are Cisco extensions?
Cisco Compatible eXtensions (CCX) are a set of Cisco-proprietary additions to the 802.11 family of wireless LAN (WLAN) protocols. In general, if you’re connecting to a WLAN that uses Cisco enterprise-class gear, you should enable them. If not, it probably doesn’t matter much.
What is CCX in Cisco?
What is Ucce and UCCX?
What is the difference between UCCE and UCCX? UCCX is the small-size call center platform that supports up to 400 agents. UCCE has more comprehensive features and targets sophisticated operations and large agent numbers.
What is UCCX used for?
Cisco Unified Contact Center Express (UCCX) is a complete “Contact Center in a Box.” It delivers call routing, management, and administration features, and is designed for businesses ranging from very small to enterprise branch offices up to 400 agents.
What is coverage hole and coverage hole filling?
Coverage holes are areas where clients cannot receive a signal from the wireless network. A coverage hole is considered to have occurred when client SNRs falls below a predetermined level. Coverage holes are usually caused by physical obstructions such as buildings, foliage, hills, tunnels and indoor parking garages.
What is the difference between access point and extender?
Access point is a wireless networking device that allows wireless devices and networks to connect through a wired network using wireless technologies such as Wi-Fi. Extender, sometimes called as repeater, on the other hand, is a networking device used to extend the coverage area of your wireless network.