What are standard plasterboard sizes?
How Thick is Plasterboard
- The standard plasterboard sheet size is 120 cm in width and from 180 to 360 cm in height. The sizes are designed to support the standard stud spacing, which is 60 cm.
- The plasterboard sizes for ceilings are 9.5mm or 10mm.
- Plasterboard sizes for walls are 12.5mm or 13mm.
What sizes does GIB board come in?
GIB® Standard plasterboard is an economical lining material available in 10mm and 13mm thicknesses.
- 10mm GIB® Standard plasterboard is suitable for walls.
- Thicker and more rigid 13mm GIB® Standard plasterboard is recommended for ceilings as its less prone to sagging than 10mm plasterboard in a ceiling application.
What is the difference between gypsum board and plasterboard?
As per ASTM C11, the gypsum board is “the general name for a family of sheet products consisting essentially of gypsum.” Also known as plasterboard or drywall, the gypsum board is a technical name given to a plaster-based wall finish that helps in creating light walls.
Can you use plasterboard outside?
Plasterboard is also being used in the ceilings of carports, balconies, breezeways and other external areas. (Please note that plasterboard must not be installed in eaves or as exterior cladding.) The external ceiling is however always exposed to the natural elements, and with higher exposure comes higher risk.
What width do plasterboard come in?
Thicknesses of plasterboard can range between 9mm and 102mm, depending on the type of board you require. Standard plasterboard thicknesses for ceilings are usually 9.5 mm to 12.5 mm, while walls can be 12.5 mm to 15 mm.
Can I paint straight onto plasterboard?
You can paint straight onto/over plasterboard in most cases, you simply need to cover the joints and any holes created by your fixings first. Being able to paint directly onto the surface of the new wall is convenient and saves time and money. You can also plaster over painted plasterboard at a later stage.
What kind of drywall do you use for exterior walls?
Fiberglass-Faced Gypsum Sheathing helps exterior walls resist air, water and noise infiltration. Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.
Why is plasterboard called Gib?
The GIB® brand name started its journey in the early 1930s when a staff competition offered a £30 cash prize for the best name. Gibraltar board was chosen for its association with the strength and resilience of the Rock of Gibraltar.
Why is there a shortage of GIB board?
Fletcher Building says the GIB shortages are due to record levels of building activity. In a typical year, about 35-thousand building consents are issued, but in the past 12 months, there’s been 50-thousand, and that’s putting massive pressure on both the sector and its supply chain.
Can I use plasterboard in my shed?
Plasterboard can be used to line the interior walls of a summerhouse or shed, so long as the structure has been insulated and has a vapour barrier in place. Using plasterboard is a popular choice when converting a summerhouse or shed and aiming to achieve the look & feel of another room in the house.
Can you use moisture resistant plasterboard outside?
Post your job to find high quality tradespeople and get free quotes. I wouldn’t advise using plaster board externaly where there is a possibility directly or indirectly of any moisture absorbtion.
What size is 6×3 plasterboard?
Plasterboard – 1800 x 900 x 9.5mm (6 x 3ft)
Do you need to tape plasterboard joints?
Without applying scrim tape, the joints between plasterboards will be a weak spot during the plastering process, leading to cracking. It is important therefore to properly tape the joints, and scrim tape is an easy material to create a secure join.
Can I paint plasterboard without plastering?
Painting Plasterboard is Perfectly Fine The smooth surface should provide as good of a look as a plastered wall, though painting plasterboard may require an additional mist coat due to its absorbent nature.
What is exterior drywall called?
Exterior Gypsum Sheathing
Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.
How thick is exterior drywall?
The most common thicknesses for general application are 3/8 inch and 1/2 inch. However, several decades ago, 1/2 inch became the industry standard.
What is Mitre 10 plasterboard?
Plasterboard If you need plasterboard then Mitre 10 is your best mate, from 10mm recessed, party wall systems, your stopping gear and mouldings. We only sell the top brands and can deliver on time and in full.
What building supplies does Mitre 10 sell?
At Mitre 10 we stock a wide range of building supplies including cement, insulation, plasterboard and sealants.
Which is the best brand of plasterboard to buy?
Plasterboard Plasterboard If you need plasterboard then Mitre 10 is your best mate, from 10mm recessed, party wall systems, your stopping gear and mouldings. We only sell the top brands and can deliver on time and in full.