What is a Serged seam finish?
Serged Seam Finish – Description. Description. A line of overcast stitches is sewn over the raw edge of the seam allowance. Suitable For. Most fabrics.
What tension should I use for zig zag stitch?
What tension should I use for the zigzag stitch? The thread tension plays a significant role in stitching properly. Normally a sewing machine has a setting options dial from 0 to 9. The default 4.5 is considered as an ideal setting for zigzag stitch on almost all types of fabrics.
Is a Serged seam strong?
A serger stitch adds stretch and strength to seams, simplifies edge finishes, and even embellishes a garment.
Can you Serge without a serger?
Serging without a Serger Option #2: How to Use a ZigZag Stitch as an Overlocking Stitch. If your sewing machine doesn’t have any of the overlock stitches, but it has a zigzag stitch then here is another option! Sew a narrow zigzag stitch right on the edge of the fabric using the regular zigzag presser foot.
Can you use an overlocker to sew seams?
Sewing a seam on an overlocker is really very simple. Fold a scrap of the same fabric you will be using to make the garment in half to recreate the double thickness you will work with when sewing a seam. Look at the distance between the left needle and the markings on the machine casing to the right of the needles.
What does it mean to neaten a seam?
This seam neatening technique is called a “clean finish” or a “turn and stitch” and is suitable for medium to lightweight fabrics. Its a great one if you don’t have an overlocker and don’t wish to zig zag over your seam edges. There are two techniques to construct this seam finish depending on the type of fabric.
Why does my zigzag stitch look weird?
If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top. It may show at the sides of the stitch and the fabric is slightly raised or bunched. If you see this, slacken off the tension slightly (perhaps to between 3 and 4).
Why is my zigzag stitch puckering?
The thread is not receiving the tension it needs. This could be because it was not threaded correctly or the tension needs to be adjusted.
Why use a serger instead of a sewing machine?
First and foremost, a serger is the ideal way to create a clean edge on any seam. Not only does the cutting blade trim the fabric edge, but the upper and lower looper threads wrap around the fabric edge, securing or protecting the fabric edge. Another great function of the serger is for construction.
What is the strongest sewing seam?
Flat felled seams are the strongest seams and won’t fray as raw edges are hidden. Although often sewn on thick fabrics, they can be sewn on thinner fabrics as they produce a very neat finish.
What is a zigzag seam finish?
A zigzag seam finish is simply zigzag stitching applied to the raw edge of a seam allowance on a seam that you sew. A sewn seam is not complete until you apply a seam finish to prevent the seam from becoming weak due to the fabric fraying.
How do you use zigzag stitch on a sewing machine?
The right-hand point of each zigzag should just reach the edge of your fabric. Some sewing machines will happily backtack (reverse stitch) on the zigzag setting, in which case backtack at both ends of the seam.
How do you backtack a zigzag seam?
Other machines will knot the threads up when you try zigzag backtacking, in which case you can tie the loose threads in a double knot by hand. Alternatively you could backtack on the straight stitch setting at either end of the seam.
How do you finish seams on a sewing machine?
Finishing the seams on your handmade clothes is important to neaten them, strengthen them and prevent them from fraying. If you don’t have an overlocker or serger, a simple way to finish seams is by using the zigzag stitch on your sewing machine.