What is AC Plus charger?
Capable of charging all battery chemistries, the X2 AC Plus has a built-in 10-amp power supply, internal balancing circuits and 10 different charge/discharge profiles, making it an essential tool for all hobbyists. You can even utilize your smartphone for remote control via an optional WiFi module.
How do you charge a micro battery?
Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs – one red and one green. While charging, the red LED is lit.
How long does it take to charge a 3000mAh NiMH battery?
A 3000 mAh battery can take up to 45 minutes to charge. It’s not a good idea to use timed charging. If you put it on charge without fully discharging it, you’ll end up with a massive overcharge.
What amp should I charge my NiMH battery at?
The high-performance NiMH battery chargers with a minimum charge rate of 4 to 5 amps in one cycle are required and needed to charge the high capacity NiMH batteries completely that varies around 3000 to 5000 mAH.
How do you fix a connection break on a Lipo battery?
If you get Connection Break the problem is possibly the cable from the battery to the charger. It could be a dirty connector either on one end of the connector or on the battery itself. Get some electronic contact cleaner and clean all the pins and sockets associated with the cable, battery and charger. I use Deoxit.
Can you overcharge NiMH?
Excessive overcharging of a NiMH cell can result in permanent loss in capacity and cycle life. If a cell is overcharged to the point at which pressure begins to build up, elevated temperatures are experienced and can cause the separator to lose electrolyte.
What is a balance connector?
A balance connector is nothing more than a breakout connector for accessing all the individual cells contained in a lipo. This allows for the monitoring and manipulation of each cell individually.