What is post fader and pre fader?
Pre-fader sends. The audio channel signal is sent to the FX channel before the audio channel volume fader. Post-fader sends. The audio channel signal is sent to the FX channel after the audio channel volume fader.
Should monitors be pre or post fader?
A: Pre-fader sends are normally used for monitors, cue mixes, or headphone mixes. This is so that moves made with the faders (which affect front of house or the in-studio mix) do not affect the monitor mix, which needs to be independent. Post-fader sends are almost always used for effects.
What is post fader used for?
Post-fader Aux Sends are generally used as “effects sends,” to send a signal out from a particular channel to an effects processor (see WFTD Effects Loop).
Should you mix in pre fader?
All in all, you can achieve a great mix whether it is pre or post fader metering. It just depends on how you like to mix.
What is a post fader?
Pre or post-fader refers to signal sends (to an auxiliary or bus channel) either in your DAW or on a physical mixing console, more specifically where you send them from.
Should you mix in pre-fader?
What is pre and post EQ?
Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.
What does Sends on fader do?
Sends on faders allows you to quickly access all sends to a certain mix. When enabled all faders will show the level send to the selected bus instead of the LR mix. It is also possible to show the channel gains on the faders.
What is pre fade listen?
In a console, pre-fade listen is a one of several possible means of overriding the normal monitor signal routing for various purposes. PFL generally sends a signal to monitor outputs regardless of the setting of that channel’s fader, and simultaneously mutes the other channels.
What is pre fade?
Definition of prefade : a function of an electronic device that allows an operator to observe a video or audio signal prior to fading it in (as on live television or radio) used prefade to check the sound quality —often used before another noun turned on prefade modea prefade circuit.
What is post EQ?
The post EQ switch changes the signal routing in the unit so that after the preamp the signal goes to the EQ first and then the compressor. By EQing the signal before it is compressed you can alter how the compressor affects the signal.
Should I come before compression?
This means that if you use EQ before a compressor, you will diminish the effects of the EQ by reducing the dynamics. So if your goal is to reduce the dynamic range of a signal, and then take that more-even signal and adjust specific frequencies, compress the signal first, then add your EQ.
What is after fader listen?
Often abbreviated AFL, this refers to overriding the normal monitoring path in a mixer in order to monitor a specific signal after the fader of a channel or group bus, such that the position of the fader will affect the level in the AFL monitor circuit.
What does PFL and AFL mean?
Let’s look at a common button on most audio consoles. The labels may vary, but the difference is important. AFL stands for After-Fade Listen while PFL stands for Pre-Fade Listen. Depending on the current state of your console, pressing solo in either mode may result in the same thing.
What is a post fader audio?
(See WFTD archives Pre Fade/Post Fade) A post fader Aux Send taps the incoming signal from the channel at a point after the channel fader. This means that when the channel fader is down, no signal is sent out the Aux Send(s) on that channel.
What is the difference between pre fader and post fader?
Pre Versus Post Fader. (See WFTD archives Pre Fade/Post Fade) A post fader Aux Send taps the incoming signal from the channel at a point after the channel fader. This means that when the channel fader is down, no signal is sent out the Aux Send(s) on that channel.
What is the difference between a post-fader and a pre-fader auxiliary send?
“What is the difference between a post-fader and a pre-fader auxiliary send and in what situations would I use either one?” (See WFTD archives Pre Fade /Post Fade) A post fader Aux Send taps the incoming signal from the channel at a point after the channel fader.
Where to use pre fader and pre eq sends?
In a live situation, pre fader and pre EQ sends are usually best where the mixer may be feeding stage monitors.
What are the different types of fader sends?
There are three types of sends: post pan, post fader, and pre fader. These can be a bit confusing because you might think that the pan knob comes before the volume fader, just because of it’s position on the channel visually. The opposite is actually true.