What is the best material to use for a fascia board?
Wood: Wood is perhaps the most common selection when it comes to designing a fascia board. Wood designs can bring a pleasing aesthetic value to the home, especially if your home has wooden siding. Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture.
What size boards are used for fascia?
Fascia Board Sizes Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
Does Home Depot sell fascia?
A: Brown fascia is available at some Home Depot locations. Check on line or with your local Home depot associate.
Can you use deck board for fascia?
Another option is to use two deck boards as fascia. Customers often chose this option if they want to match an exact color to their decking, border, or railing.
What can I use instead of fascia board?
Vinyl. Vinyl siding is a common alternative to fascia board. This type of rafter facing does not rot or wear as quickly as fascia board under the same weather conditions.
What wood is best for fascia?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
What can I use for deck fascia board?
If you choose to add fascia, any kind of pressure-treated or otherwise rot-resistant lumber can be used. However, if you’ve opted for synthetic decking in one of the many colors available, you’ll want to consider using a complementary PVC fascia. PVC fascia typically comes in 1/2-in. x 11-3/4-in.
What type of wood is best for fascia board?
How far apart do you nail fascia?
Never face nail fascia. *Keep nails lined up with soffit V-grooves for best appearance. Nail every 24″, but do not nail too tight. Nails should penetrate a minimum of 3/4″ into nailing surface.
Can I use screws for fascia?
Hometime.com recommends using screws instead of nails when replacing fascia to avoid jarring the existing framing with hammering.