What is the standard size of a wallpaper roll?
21″ x 16.5′
In the U.S.A., a single roll of wallpaper is typically defined as a wallpaper roll with the dimensions 21 inches wide and 16.5 feet in length (21″ x 16.5′). A double roll usually has the dimensions of 21 inches wide and 33 feet in length (21″ x 33′).
How many yards of wallpaper do I need for a bolt?
A bolt is a roll of wallpaper that is typically equivalent to two single rolls of wallpaper. A standard bolt of wallpaper in the United States is 9 yards long. However, bolts are not always listed in yards, and they are not always a standard 9-yard length.
What is a double roll bolt of wallpaper?
A single wallpaper roll and double wallpaper roll are both just one roll of wallpaper, with a double roll being a longer length than a single roll. In other words, two single rolls = one double roll. The standard double roll wallpaper size is 20.8” wide x 33′ long.
What is a 30-yard bolt wallpaper?
You order commercial wallpaper like you would order fabric, except it must be in 30-yard increments. Each 30-yards is known as “a bolt” and rolled around a center piece of cardboard. 90 yards, for example, would be the equivalent to 3 bolts.
How much wallpaper is in a roll?
about 35 square feet
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll.
What size is a roll of wallpaper UK?
Wallpaper rolls typically measure 10m in length and 53.5cm in width. Taking a quick measurement of your wall length and ceiling height will confirm how many drops you can expect from your roll of wallpaper. Typically, ceiling height is around 2760mm.
Is a bolt the same as a roll in wallpaper?
American Single Roll: A single roll of wallpaper that measures (typically) 27 inches in width and 4.5 yards long. Bolt: A continuous roll of wallpaper equivalent to two or more single rolls packaged together.
How do I figure out how much wallpaper I need?
Width divided by 12 = number of feet. Number of feet multiplied by 3 (1 yard) = square feet/width (square feet per lineal yard)…For example:
- 150 yards of 54-inch wide material.
- 54 inches is 13.5 square feet per yard (54/12 = 4.5 X 3 = 13.5)
- 150 yards multiplied by 13.5 = 2,025 square feet of wall space to cover.
How many rolls of wallpaper are in a bolt?
2 Single Rolls
For a rough estimate on determining how much wallpaper is required, please see the chart below. One Bolt (one Double Roll) = 2 Single Rolls.
What is a yard of wallpaper?
Calculating Linear Yards of Wallpaper Suppose you purchase wallpaper that comes in 42-inch rolls. That corresponds to a width of 3.5 feet, so a yard of paper covers an area of 3 x 3.5 = 10.5 square feet. On the other hand, if the width of the roll is only 36 inches, a yard covers only 9 square feet.
How many drops do you get from a roll of wallpaper?
3 drops
There is normally 3 drops to a roll, any excess paper will do above doors and windows if needed.
How many strips of wallpaper are in a roll?
Generally 27” wide wallpaper will still provide 3 strips on the wall, so your coverage would increase to 81” per roll. Conversely, some wallpaper with no repeat, or a very small repeat can yield 4 full strips of material, in which case less wallpaper is needed.
How many drops do you get in a roll of wallpaper?
How much does a single roll of wallpaper cover?
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll. Enter the total of all wall widths, in feet, in the room.
How much wallpaper do I need with pattern repeat?
Calculating How Much Wallpaper You Need First, determine the total length of the wall surface you plan to wallpaper. Then multiply that length by the height of the walls. For example, a 13-foot x 11-foot room with 8-foot high ceilings will have 384 square feet of wall space.
How do I calculate how many rolls of wallpaper I need?
How To Measure Wallpaper?
- If the width is 27 inches then you divide the square footage by 63 to find out how many double rolls you need.
- If the width is 20.50 inches or 21 inches then you divide the square footage by 56 to find out how many double rolls you need.