What model is my Aqualisa shower?
The majority of Aqualisa’s Showers don’t have a name or model written on, but some electric showers have the model inscribed on the front covers. To identify which of Aqualisa’s shower range you have within your bathroom, you can contact Aqualisa’s customer service team.
Why does my Aqualisa shower keep going cold?
Aqualisa shower going hot/cold The things to check first are. 1 That the main valve coming into your house is fully open. 2 Then check that the valve on the line to the shower is fully open. The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.
Why do thermostatic cartridges fail?
There are several reasons why the cartridge may have failed; the number one cause is an in-balance in water pressure between the mains cold pressure and the heated hot water(and this is very common). This constant in-balance between the two will cause damage to the cartridge which is housed within the valve.
How do you remove Aqualisa shower rail?
if the rail needs to be removed at any stage, insert the special tool provided into the rear of the bottom rail bracket to disengage the rail locking tab. Carefully ease the rail up and away from the fixing bracket. Pass the hose through the gel hook.
Do Aqualisa showers need servicing?
We offer a servicing pack to our Smart digital Showers and Aquastream Thermostatic Showers. Both options above are supplied with a 1 year’s manufacturer’s warranty on the parts replaced.
How long are Aqualisa showers guaranteed for?
All our showers come with a 1-year guarantee. For extra peace of mind, register your shower with us and benefit from a 2 to 5-year warranty, depending on your shower model.
Is there a reset button on an Aqualisa shower?
It’s necessary to turn off the pump/unit for at least two to three hours in order to reset the Aqualisa Quartz Digital Shower. The power will not be reset if turned off and on quickly.
How long should a thermostatic shower last?
On average, the flow cartridge lasts 2 years.
Can shower cartridges be repaired?
Most single-handle, cartridge-style faucets can be repaired in an hour or less with basic tools.
How do you bleed an Aqualisa shower pump?
6 Steps to Bleeding a Shower Pump
- Step 1: Turn off the pump. So, the first thing you need to do is turn off the power to the shower pump.
- Step 2: Remove the Showerhead.
- Step 3: Run the Shower on Cold Full Blast.
- Step 4: Run the Shower on Hot Full Blast.
- Step 5: Leave the Hose to Drain.
- Step 6: Re-power the pump.
How do I get rid of Aqualisa?
Remove it using your Torx T25-bit screwdriver, making sure to unscrew it evenly so that it disengages from the valve smoothly. After removing it, you might wish to consider replacing an O-ring, which is right at the back of the valve.
Is Aqualisa a good brand?
Aqualisa is a popular shower brand and is highly trusted by many consumers around the UK. Aqualisa’s products have been available on the market for over 40 years, and Aqualisa have gained years of experience since they were founded in 1976 by Derek Goldsmith.
Why is my shower not heating up?
If the water in your shower isn’t getting hot, the problem could be the temperature control on the water heater. If you have an older unit, the cold water supply dip tube could have deteriorated. In that case, a worn-out dip tube could send cold water up to the hot water feed pipe, resulting in no hot water.