What should my brace height be on a recurve?
These guidelines work for most recurve bows, but always follow the manufacturer’s recommended brace-height range. 62- and 64-inch bows have 7½- to 8½- inch brace heights. 66- and 68-inch bows have 8- to 9-inch brace heights. 70- and 72-inch bows have 8¾- to 9½-inch brace heights.
What is the brace height of a Bear Grizzly recurve?
7½” – 8½”
Manufacturer recommended brace height: 7½” – 8½”. Replacement string length of 54″ recommended.
What should a bows long bow brace height be?
Longbows generally are never braced lower than six inches and recurves rarely less than seven. Many modern longbows like to be braced at or around seven inches and recurves, depending on design, between seven and nine inches. Brace height is determined from the deepest portion of the grip.
Does brace height affect accuracy?
In addition to speed, brace height also affects accuracy. Experienced archers often refer to this as “forgiveness.” A bow with more forgiveness will be easier to shoot and result in improved accuracy.
What is the best Bear recurve bow?
Bear Archery’s Top 3 Recurve Bows:
| Model | Length | Bow Weight |
|---|---|---|
| Bear Grizzly Recurve Bow See on Amazon.com | 58″ | ~2 lbs Our Review |
| Bear Archery Super Kodiak See on Amazon.com | 60″ | 3 lbs. Our Review |
| Bear Kodiak Cub Recurve Bow See on Amazon.com | 24″ | ~1.7 lbs Our Review |
Why is a longer brace height more forgiving?
Longer brace height Bows with longer brace heights are going to be more forgiving. This is because the arrow is coming off of the string sooner rather than later, meaning that the shooter has less time to influence the shot. These are also usually a bit slower in terms of fps.
Is a shorter brace height better?
A short brace height offers the benefit of higher arrow velocity. This is because the bowstring is being drawn farther in order to reach the user’s draw length since, at rest, the bowstring is closer to the bow grip.
Does changing brace height affect draw weight?
no. When you get to the end of your draw length it should be the same. But the preload is higher so the weight when you start to draw starts heavier as you alluded to.
Where are bear archery bows made?
Gainesville, Florida
Bear Archery is a manufacturer and marketer of bows and archery equipment located in Gainesville, Florida owned by Escalade Sports.
What is Bear flagship bow?
The Refine EKO is the new legend series flagship bow at Bear Archery for 2022. With a forgiving 33″ axle-to-axle and 6 3/8″ brace height, the Refine EKO was designed to be more precise and accurate on the range or in the woods.
Is Bear legit a good bow?
Conclusion. As you might expect from an entry-level bow, the Legit is not the fastest bow on the market, but with speeds up to 315 feet per second, it’s got plenty of zip to get the job done in the woods or on the target line. The bow draws smooth, holds tight, and delivers a shooter-friendly shot.