What size are leaf spring bolts?
Their are two common diameters of trailer Leaf Spring Bolts on most trailers, the 1/2 inch diameter, and the 9/16″ Diameter.
What size are leaf spring shackle bolts?
Shackle bolts are used to secure your trailer’s spring leaf. This shackle bolt is 3-1/2 inches long and 9/16 inch in diameter. Each bolt is fluted to prevent wear and tear on your hanging plates.
What bolts to use on leaf springs?
Spring Eye Bolts, Grade 8, Should Be The ONLY Spring Eye Bolt/Shackle Bolt used due to the increased strength and torqueing ability needed when installing your Leaf Spring Suspension.
How do you remove a leaf spring center bolt?
If the leaves are in good condition, remove and replace the center bolt. Use vise grips on the rounded head and a socket on the other side to pull out the pin. Alternately, replace the entire leaf spring with a new center bolt.
What size are YJ shackle bolts?
Shackle Bolts and Bushing Kit (87-95 YJ) Front or Rear
| Spring Eye Inside Diameter | 1 1/4″, 1 1/2″ |
|---|---|
| Bolt Size | 1/2″, 9/16″ |
| Spring Manufacture | Rubicon, Skyjacker, Bds, Old man emu, Procomp, Deaver, Alcan, Black diamond, Other |
What is a leaf spring rebound clip?
Definition of rebound clip : a clip surrounding the back and one or two other leaves of a leaf spring and usually rigidly fastened to the shortest to distribute the load during rebounds.
What do leaf spring clips do?
Many think that the purpose of the clips are to keep the leaves from fanning out. While they do stop the the fanning, their main function is to hold the leaves together during rebound. In fact the correct name of them is “rebound clips” A spring does not break when it is being compressed, it breaks on rebound.
What are shackles sized by?
Shackles are sized according to the diameter of the bow section rather than the pin size. Never use a shackle if the distance between the eyes is greater than listed in the manufacturer’s tables.
What size are the bolts on a Ford Ranger?
The 2003-2006 Ford Explorer Sport Trac uses 5/8″ x 4-1/2″ Grade 8 bolts in the front spring hanger The 1983-1985 Ford Ranger uses 5/8″ x 4-1/2″ Grade 8 bolts in the rear spring hanger The 2004-2011 Ford Ranger uses 5/8″ x 4-1/2″ Grade 8 bolts in the front spring hanger
What size are the leaf springs on a Ford Explorer?
The chart below lists the leaf spring specs for the Ford Explorer, Ranger, Bronco, and Bronco II. The 1991-2002 Ford Explorer and Explorer Sport uses 9/16″ x 4-1/2″ Grade 8 bolts in the front and rear hanger Grading, 1Lv @.341, 1Lv @.307, 1Lv @.291, 1Lv @.590
What are the grades of the leaf springs?
Grading, 1Lv @.341, 1Lv @.307, 1Lv @.291, 1Lv @.590 Looking for stock or heavy duty replacement leaf springs?
What size are the bolts on a Ford Explorer hanger?
The 1991-2002 Ford Explorer and Explorer Sport uses 9/16″ x 4-1/2″ Grade 8 bolts in the front and rear hanger Grading, 1Lv @.341, 1Lv @.307, 1Lv @.291, 1Lv @.590