What size is a W8x10?
Wide Flange Beam Specifications Chart
| SIZE | LBS/FT | DEPTH |
|---|---|---|
| W8x10 | 10 | 7.89 |
| W8x13 | 13 | 7.99 |
| W8x15 | 15 | 8.11 |
| W8x18 | 18 | 8.14 |
How do you calculate wide flange beam weight?
Wide flange beams are designated by the letter W followed by the nminal depth in inches and the weight in pounds per foot. Thus W12 × 19 designates a wide flange beam with a depth of 12 inches and a nominal weight of 19 pounds per foot.
What are the dimensions of a W12x26 beam?
Structural A36 Steel Wide Flange I Beam Section Properties Table
| in × lb/ft | Area (in2) | d (in) |
|---|---|---|
| W12x30 | 8.79 | 12.34 |
| W12x26 | 7.65 | 12.22 |
| W12x22 | 6.48 | 12.31 |
| W12x19 | 5.57 | 12.16 |
What are wt sections?
WT sections are commonly used as chord members in lightly and moderately loaded roof and floor trusses. In this application, these members are subjected to combined axial and flexural loads. The design of these sections for flexural loads was not specifically addressed in the ASD Specification.
What is WT in structural steel?
WT steel is steel with improved toughness. This type of steel must meet specific testing requirements, based on the daily mean minimum temperature in the location where it is to be used.
What does PL mean in steel?
Designation or codes of steel members
| Section type | Material standard | Abbreviation |
|---|---|---|
| Square bar | AS/NZS 3679.1 | SQ |
| Plate | AS/NZS 3678 | PLATE or PL |
| Circular hollow sections | AS 1163 | CHS |
| Rectangular hollow sections | AS 1163 | RHS |
How do you calculate section weight of steel?
2. Exact weight: The exact weight is calculated as follows: Gx = V * wpm, where V is the volume of the beam body, all features considered. wpm = mweight / A mweight is calculated as above. A is the section area, calculated by Advance Steel from the exact section (with arcs).