What thread do brake lines use?
Normally, a 7/16 fine thread is 7/16-20. The threads for 1/4″ brake lines where a rubber hose screws into a wheel cylinder with a copper gasket ARE the 7/16-20 standard fine thread. 3/16″ lines use standard 3/8-24 threads for both the flare nuts and the gasketed fittings.
What thread is 3/16 brake fittings?
3/16″/4.75mm Metric thread brake line nuts and fittings.
What size nut is on brake line?
Brake line wrenches (often called flare nut wrenches or simply line wrenches) serve a specific purpose in a mechanic’s toolbox. Several styles exist, but determining which brake line wrench is right for my vehicle isn’t really that hard. Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
Can u use compression fittings on brake lines?
Do not use a compression fitting on your brake system. When you are on the road not only your safety but the safety of others is at risk if you have a compromised brake system. When you press your brake pedal the PSI (pounds per square inch) exerted on your brake system is great often over 1,000 PSI in normal braking.
Why you shouldn’t use compression fittings on brake lines?
Because your brake system creates a substantial amount of pressure, the compression fittings are prone to failure. In addition, compression fittings are known to leak when used on brake lines, causing a loss in brake fluid, and ultimately failure of the braking system.
Can I use a brass compression fitting on brake line?
You cannot, under any circumstances, use compression fittings to repair the lines on a public transportation vehicle. Many states have banned the use of this repair on passenger vehicles, too. In addition, you might find that compression fittings will cause your vehicle to fail inspection.
What size is brake line nut?
Most domestic cars use a 7/16-in. size, while imports typically use a 10 mm.
What size NPT do you use for brake lines?
Pn# – ADT-11- 2 pc Solid Brass Brake Line Adapter Male 1/8″ NPT To A Female 3/8-24 Inverted Flare 3/16″ Brake Line. Used On Adjustable Proportioning Valve, Residual Valves, Brake Switches, ETC. Match the thread and flare type to the lines being connected. It is important that both flare type and thread match for a leak-proof connection.
What kind of thread do you use for a brake line?
Brake Line Fitting, 90 degree, Steel, Zinc Finish, -4 AN Male Threads, 1/8 in. NPT Male Threads, Each Fittings, Brass, Male 1/8 in. NPT to Female 3/16 in. Thread, Inverted Flare, 90 Degree, Set of 4
What size fittings do I need for a NPT to NPT?
Fittings, Brass, Male 1/8 in. NPT to Female 3/8 in.-24 Thread, Inverted Flare, Set of 4 Fittings, Brass, Male 1/8 in. NPT to Female 1/4 in. Thread, Inverted Flare, Set of 4 Brake Fitting, 90 degree, Brass, Natural, 3/8-24 in. Inverted Flare Female Threads, 1/8 in. NPT Male Threads
What kind of brake line does ADT 11 use?
Pn# – ADT-11- 2 pc Solid Brass Brake Line Adapter Male 1/8″ NPT To A Female 3/8-24 Inverted Flare 3/16″ Brake Line. Used On Adjustable Proportioning Valve, Residual Valves, Brake Switches, ETC.