What tools will I need to change my spark plugs?
The Tools Needed to Change Spark Plugs
- Spark plug swivel socket with extension.
- Flexible handle ratchet.
- Spark plug boot puller pliers.
- Spark plug gap gauge.
- Torque wrench.
- Wire loom spacers.
- Anti-seize.
- Spark plug boot grease.
What size tools do you need to change spark plugs?
A standard 5/8″ or 13/16″ socket wrench works for most old spark plugs. But if you can’t find that, get a spark plug swivel socket, which can fit into tight spaces and lock in so you can get an easy spark plug replacement.
What tool helps remove and install spark plugs?
Everything You’ll Need To Change Spark Plugs
- Ratcheting socket wrench.
- Socket wrench extension.
- Spark plug socket.
- Flexible socket wrench joint adapter, if necessary.
- Spark plug gap tool.
- Torque wrench.
- Vacuum and/or compressed air blower.
- Clean rag or paper towels.
What size socket do I need for spark plugs?
Tools Needed to Change Spark Plugs in a Car Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
What size is a standard spark plug socket?
The most common spark plug socket sizes are the 5/8 inch and 13/16 inch sockets.
What size socket do I need for spark plug?
The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.
Can I use a regular socket to remove spark plugs?
Do I Need A Special Socket For Spark Plugs? Yes and no. While a regular socket should do the job well too, a special socket is often the right tool for the job. Modern car engines have a very complicated spark plug placement.
Is 5/8 inch the same as 16mm?
16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch. 19mm = 3/4 inch.
Do I need a special socket for spark plugs?
no you don’t need a spark plug socket to remove and install spark plugs. A deep socket in the correct size will work in most cases, if enough patience is used and maybe some pliers to go along with the socket.
What size is a spark plug nut?
Spark Plug Socket Size Chart
| Spark Plug Size (inches) | Spark Plug Size (mm) | Socket Size (inches) |
|---|---|---|
| 3/4 | 19 | 3/4 |
| 11/16 | 18 | 11/16 |
| 5/8 | 16 | 5/8 (16mm) |
| 9/16 | 14 | 9/16 |
What size socket is needed for spark plugs?
Tools Needed to Change Spark Plugs in a Car Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.
Why is there no 16 mm wrench?
1911, is there a reason they don’t use any 16MM nuts or bolts? 16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don’t find them in most basic wrench / socket sets.
What spark plug socket do I need?
How To Find The Right Spark Plug Socket Size
| Socket Size (in inches) | Socket Size (in mm) | Typical Application |
|---|---|---|
| 5/8 | 16 | In a newer vehicle or small engine cars |
| 13/16 | 20 | Older vehicle engines |
| 9/16 | 14 | Newer Asian cars and Ford vehicle engines |
| 3/4 | 18 | Motorcycles |
Can you take out spark plug with regular socket?
What size is a car spark plug socket?
Most often, the spark plug will be either a 5/8 inch or 13/16 inch one. Most newer vehicles will have a 5/8-inch spark plug. Smaller engines, such as those in lawnmowers will also have a spark plug of this size.As such, the spark plug socket used is also a 5/8-inch one.