Which of the following is not part of the pre trip inspection?
Which of these is not part of the pre-trip inspection of the engine compartment? A Valve clearance. See: Step 2 – Check Engine Compartment. Valve clearance is not on the checklist.
Where should the ignition key be during the pre-trip inspection?
You should keep the starter switch key in your pocket while you perform the pre-trip inspection because.
Why take the key with you during a pre-trip inspection?
Question: For what reason do you keep the starter switch key in your pocket during the pre-trip inspection? Answer: So no one moves the vehicle while you are inspecting underneath it.
Why put the starter switch key in your pocket during pre inspection?
A someone could start and move the truck. You don’t want someone (like a co-driver) who isn’t aware of your location to start your vehicle and injure you while you’re doing the pre-trip inspection.
Where should you ignition key be during your pre-trip inspection?
What’s the most important hand signal that you and the helper should agree on?
The most important hand signal to discuss and agree upon is the one used for “stop.” It is important that the helper stand at the back of the vehicle, in a spot where the driver can see them clearly. This will help collisions and aid the driver during “blind spots.” 1 Was this helpful?
Why should you back towards the driver side CDL?
Why should you back toward the driver’s side? Back to the driver’s side so you can see better. Backing toward the right side is very dangerous because you can’t see as well. If you back and turn toward the driver’s side, you can watch the rear of your vehicle by looking out the side window.
What are the two main things to look for ahead CDL?
The two key things you should be checking for ahead of time are traffic and road conditions. Keep an eye out for vehicles entering the highway, merging into your lane, or turning. Keep an eye out for slowing automobiles’ brake lights.
Why put the starter key in your pocket during pre-trip inspection?
What is the South Carolina CDL pre-trip checklist test?
Vehicle Pre-Trip Checklist Inspection – South Carolina CDL Skills Tests: The South Carolina vehicle inspection test (walk-around) requires the driver to point out vehicle components and explain what you are checking and why to the examiner. This includes an under the hood engine compartment inspection.
How hard is the CDL pre-trip inspection?
The CDL Pre-Trip Inspection can be the most daunting portion of the driving test. But, it’s easy if you study. Use this FREE study guide to prepare for your CDL Skills test.
How do I pass the pre-trip inspection?
• The Pre-Trip Inspection is a verbal test. • Say at least 2 things about every item you inspect. • Point to, or touch, every item that you inspect. • Mention all damaged items to the tester.
What should the air pressure be when performing a pre-trip inspection?
The air pressure must rise from 85 to 100psi in 45 seconds or less. Next, fast idle the truck up to 120-140psi, at which point the governor cut-out should occur. Psshhh! Instructor Atom demonstrates a full Class A CDL Pre-Trip inspection.