Why does my KitchenAid microwave says open and close door?
“Door” or “Open/Close” Appearing in the Display If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.
Why does my microwave keep saying door?
If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then begin the cycle.
Why is my microwave door not closing?
If your microwave door won’t latch or is not closing, it may be because of a broken torsion spring. Luckily, this is an easy problem to diagnose and repair yourself. Torsion springs are used to keep the microwave door closed on units with doors that open downwards.
What does it mean when microwave says door?
How do I know if my microwave door switch is bad?
Common symptoms related to a faulty secondary door switch include: microwave will not turn/shut off, or the microwave will not heat properly. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged.
How do you reset a microwave door?
A soft reset is simply turning off the microwave oven to cancel or erase the program you’ve input in the microwave. To do this, you will just simply press on the Off/Clear button. Pressing Off/Clear button and holding it for about 3 seconds will also resolve the Control Locked feature of the microwave.
What causes microwave door not to close?
Torsion Springs If your microwave door won’t latch or is not closing, it may be because of a broken torsion spring. Luckily, this is an easy problem to diagnose and repair yourself. Torsion springs are used to keep the microwave door closed on units with doors that open downwards.
Why does my Whirlpool microwave keep saying door?
If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.
What does sensor error mean on a microwave?
The error message is caused by opening the microwave door too early when you are using the sensor cooking function. Removing the error message from the microwave display takes only a moment.
How can you tell if a door switch is bad?
A Damaged Door Switch Look for any damage to the switch plunger. If it sticks, or doesn’t protrude above the panel, the switch is likely damaged and you must replace it. Push the plunger in a few times.