Are dresser handles standard sizes?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
What are the handles called on dressers?
A drawer pull (wire pull or simply pull) is a handle to pull a drawer out of a chest of drawers, cabinet or other furniture piece.
Can you replace handles on a dresser?
There are two main ways for changing the hardware on a dresser. You can update the old dresser hardware with new knobs. OR. You can paint the old dresser hardware.
What size pulls for 36 drawer?
Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
How do you update dresser pulls?
How To Replace Old Furniture Hardware With New Drawer Pulls
- Prepare the furniture for painting.
- Remove the original hardware.
- Drill a hole for the new hardware.
- Protect the inside of the drawer.
- Fill old hardware screw holes with wood filler.
- Sand the wood filler.
- Paint the furniture.
How do you measure for replacement drawer handles?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
How do you measure handles?
To accurately measure existing fixing centers, open your kitchen door or drawer and measure the distance between the center of each screw. This measurement should be used when specifying your new handles.
How are dresser drawer handles measured?
To find the center-to-center measurement, use a screwdriver to remove your current pulls, then take a ruler or measuring tape and measure from the center of one screw hole to the center of the other screw hole.
How do you replace old drawer pulls?
How do you make old bedroom furniture look modern?
GET YOUR FREE FURNITURE REFINISHING SHOPPING LIST!
- Add Furniture Wax. If you have a piece that is stripped already or just could use new wax, consider adding a darkened wax to it.
- Clean It! Sometimes, all your next project needs is a good scrubbing.
- Spray Paint Secondhand Furniture.
- Add New Hardware.
- Swap Out the Legs.