How do you clear the error code on a CAT forklift?
Start the stopwatch and turn the forklift key switch on simultaneously. Do not press the accelerator. succession, ending the set of five with the pedal released. You need to do this within 5 seconds–if pushing the accelerator five times in a row takes longer than 5 seconds you risk never clearing the codes.
How do you clear the error code on a Nissan Forklift?
To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.
How do you clear codes on a p5000 CAT forklift?
did scribble in crayon, upon this forum: as the “Pedal Dance” in thread number 6842. Turn the ignition switch on with accel. pedal released,after 3 seconds fully depress the accel pedal 5 times within 5 seconds(end in released position).
What does E 32 mean on a CAT forklift?
yes E32 is overheat stage1. if the radiator is dirty blow it out. make sure coolant is up in the reservoir and radiator.
What is E43 code on CAT forklift?
| Error Code | Explantion | Explantion |
|---|---|---|
| E-43 | LPG fuel system diagnostic result signal | Output unit error |
| Output unit PWM power voltage error | ||
| F-01 | Memory check error | Output unit communication error |
| F-02 | Battery voltage error | Input unit error |
Does touching the battery cables together to reset computer?
Whenever you touch the battery cables together and drain the capacitors the clock will lose its memory, the radio stations will need to be reset, all fault codes will be cleared, the outside temperature may take some time to relearn, any systems with security codes will need to be reset and the computer will need to …
What is e43 code on CAT forklift?
What does E 32 mean on forklift?
E-32 is a “overheat” code, blow out radiator,check fan & belt then check thermostat and coolant level and replace if needed. Clear code & restart truck to test. Check & change transmission fluid and clean filter also if needed. Posted 2 May 2009 14:55.
Will a low battery cause codes?
A dying, fading car battery means low voltage. As a result, your car’s computer, which is responsible for reporting error codes, is also receiving low voltage. An error code will be generated which will in turn trigger the Check Engine Light or even the Battery Charge Warning Light to display.