How do you reset the ECU on a Alfa Romeo Giulia?
Registered
- Disconnect battery for 45 mins.
- Reconnect battery, and turn ignition to MAR for 90 secs.
- Turn off and leave 90 secs.
- Start engine WITHOUT pressing throttle and let the car idle for 15 mins (I repeat, do not touch the throttle whilst the car is idling)
- Turn engine off and leave for 10 minutes.
How do I reset my Alfa Romeo radio?
To reset the radio after entering an incorrect code you press and hold the “BND” button until the incorrect numbers dissapear.
How do I change the battery in my Alfa 159?
Push the top yellow securing clip down and pull the bottom yellow clip up. Pull the plastic lever down and lift the slider to unplug the top connector to the ECU. The bottom one you pull the plastic lever up and push the slider down. Now just undo the x3 13mm bolts to the battery tray and take the tray out.
How do I reset my Alfa Romeo battery?
After starting, turn the steering wheel to the left and fully lock it, wait 2 seconds, turn the steering wheel to right and fully lock it, wait 2 seconds, then turn the steering wheel to the center position, wait 2 seconds, then turn the car off. Start the car again and all the error codes should be cleared.
How do I know if my AGM battery is bad?
If a fully charged AGM battery tests more than 20 percent lower than the fully charged voltage level, it’s probably due for replacement. This is typically a symptom of battery age, damage from over/under charging, or sulfation.
Can you recharge a dead AGM battery?
You can save yourself a ton of money by trying to charge the dead battery with another AGM battery. Simply take a well-charged AGM and connect it parallel with the dead AGM battery on your charger. Use a set of jumper cables to connect the good battery to the bad one to give it a jump-start.
What type of battery is in an Alfa Romeo Giulia?
Optima – Yellow Top Deep Cycle Battery, Group Size H7, 880 CCA, 1000 CA, 154 RC (Part No. DH7)