What is swage rope?
This rope provides higher strength than standard ropes of same diameter while offering greater resistance to drum crushing, scrubbing and similar wear. We utilize a rotary swaging process to produce a compacted crosssection with minium voids and greater surface area on outer wires.
How does wire swage work?
Mechanical cable is made by twisting individual wires together in a helix to produce strands. These strands are then twisted around a central core to make wire rope. Swaging is the process of taking this rope and hammering its outside diameter to compact and flatten the strands.
What is the purpose of swaging?
A swage is the shaped tool used to transform an object’s shape into the desired form by bending or shaping. Swaging is used in the metalworking field, known as metallurgy, to serve a variety of purposes. As a noun, swaging can transform a piece of metal into a desired shape through pressure or hammering.
What is meant by peening or swaging?
Swaging (/ˈsweɪdʒɪŋ/) is a forging process in which the dimensions of an item are altered using dies into which the item is forced. Swaging is usually a cold working process, but also may be hot worked.
What is the difference between flaring and swaging?
Tools for flaring apply pressure to expand the end of pipes or tubing to create a funnel or flared shape. Swaging tools allow you to create wider, deeper openings for pipes and tubing. The use of these tools varies depending on the application of the pipes and tubing.
What is types of swage?
The 2 Types of Swaging Processes There are two primary types of swaging processes, however: tube and radial. The most common type, tube swaging is similar to extrusion in that it forces the workpiece through a die with a smaller diameter. In comparison, radial swaging involves the use of multiple dies.
What is the swaging process?
As swaging is a technique in which cold metal is formed over a grooved tool or swage, the term was adopted in the field of automotive styling to describe when two panels were brought together, an edge of one panel was swaged so to overlap the other to create the impression of one continuous surface.
What is bird caging in rigging?
Bird-caging happens when wire rope becomes twisted, or when it’s released suddenly from an load. It’s called this as it resembles – you guess it, a bird cage. Essentially, the wire rope strands become untwisted (often due to mis-use or abuse) from the core, and puff-out forming a ‘cage’.
What is the purpose of peening?
Peening aims to balance the stress concentration of the weld puddle during the cooling process. It involves stretching the weld bead over the surface to thin it out, and this action reduces the stress induced by the metal contraction as it cools.
What does swaging stand for?
Swaging (/ˈsweɪdʒɪŋ/) is a forging process in which the dimensions of an item are altered using dies into which the item is forced.
Is there a difference between wire rope and stranded wire?
Wire ropes are usually ⅜” in diameter or larger, while cables or cords are smaller. Though this little distinction exists in aircraft and marine cables, wire ropes and cables are synonymous in most other ways. A strand is made up of two or more wires twisted around a center wire. Each strand is made up of 7, 19, or 37 wires.
How do you straighten wire rope?
You can use a pickaxe to get the hole started,or wet the ground with a hose first to soften it and make it easier to pound the stake in.
What are the types of wire rope?
– Regular Lay – The wires line up with the axis of the rope. – Lang Lay – The wires form an angle with the axis of the rope. The wire lay and strand lay around the core in the same direction. – Alternate Lay – The wire rope consists of alternating regular lay and lang lay strands—used mainly for special applications.
How to splice a wire rope?
Splicing wire rope. First a half inch choker is spliced and pressed together using ferrules. Second a one and an eighth steel cable is eye spliced by hand….