Are 3.73 or 4.10 better for towing?
A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers. FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.
What does a 4.11 gear ratio mean?
Tips to Understand Drive-Axle Ratios For example, a 4.11:1 ratio means there are 4.11 teeth on the axle’s ring gear for each tooth on the driveshaft’s pinion gear. Or, put another way, the driveshaft must turn 4.11 times to turn the rear wheels one full revolution.
How much can I tow with 3.73 gears?
Administrator. Correct, 3.73 and 4.10 gears will tow up to 3500.
What is the best rear end gear ratio for towing?
The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.
Are lower gears better for towing?
Towing Axles: For maximum power and towing capability you want an axle ratio that is higher in the number of drive shaft rotations for every tire rotation. The reason for this is the lower gear sets (higher value numerically) put more low speed torque, or towing power, at the rear wheels.
How many teeth does 4.11 gears have?
Example: 4.09 / 4.10 / 4.11 Gear Ratios
| Axle | Ring Gear Teeth | Final Ratio |
|---|---|---|
| Toyota 8″ | 37 | 4.11 |
| Dana 44 | 45 | 4.09 |
| Dana 60 | 41 | 4.10 |
| GM 10.5″ 14 Bolt | 45 | 4.09 |
What gearing is best for towing?
Towing Capabilities: The other major thing that the gear ratio will affect is your truck’s ability to tow and carry large payloads. If you are towing an extremely large payload like a motorhome or anything over 5,000 pounds, an axle gear ratio of at least 3.73:1 is highly recommended.
What rear end ratio is best for towing?
between 3.55 and 3.73
The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.
Can I run 37s with 3.73 gears?
37s on 3.73s will do more damage than good. You’ll definitely need to regear to 4.88s or 5.13s. You’ll also want to have a front D44 or beef up the D30 if that’s what you have.
What’s the best rear end gear ratio?
Which gear ratio is better for towing?