Can a glass splashback be cut to size?
Like splashbacks made of natural stone, glass splashbacks require an additional level of kitchen design planning. That’s because the glass needs to be cut to size before it’s toughened. Once this is done, the entire piece cannot be cut or processed in any way.
Can you cut kitchen splashbacks?
If you need to cut your splashback, use a fine-toothed blade that’s suitable for plastics or aluminium and make sure it’s sharp so as not to melt or chip your acrylic. A router is the best tool to use but circular or table saw can also be used providing the blade is suited to plastics.
Can glass splashbacks go behind gas hob?
Can glass splashbacks go behind a gas hob? Yes, most glass splashbacks can go behind a hob with a few exceptions, it will need to be toughened first to prevent the material cracking under the heat.
Can I put glass splashback over tiles?
You can install a simple glass splashback on top of tiles in a matter of minutes using neutral cure silicone, see below for a great example of a glass splashback that has been fitted on top of existing wall tiles. TThis customer chose a glass splashback that compliments the wall tiles and worktops to great effect.
Is it easy to cut splashback?
The answer is simple: fitting one of our cut-to-size plastic kitchen splashbacks is an incredibly straightforward process, especially if you have this handy DIY guide on hand to help lead you through.
How do I fix kitchen glass splashbacks to wall?
Method
- Clean the area of the wall where the glass splashback will be fitted.
- Apply neutral cure silicone adhesive in ‘blobs’ on the rear of the splashback.
- Gentely push the glass splashback against the wall.
- Leave the splashback in place until the adhesive cures.
- Seal around the edges.
What size should a Splashback be?
Taking the overall size of your splashback space into account will make it easier to narrow down your options; Standard kitchen splashback heights are usually at 600mm however, this figure can be adjusted to suit as necessary, especially in the installation of custom designed kitchens, often ranging between the …
Can glass splashback crack from heat?
Glass splashbacks can crack under the pressure of intense heat but this typically only happens when the incorrect glass is used. At CreoGlass we only create splashbacks using toughened glass. Good quality toughened glass is both heat resistant and safe.
How thick should a glass splashback be?
6mm thick
How Thick Should A Glass Splashback Be? will ideally be 6mm thick and made from toughened glass. This thickness is more sturdy than 4mm still makes the light enough to be fitted onto your wall.
Is glass splashback cheaper than tiles?
Because of the extra amount of care required, glass splashbacks are also the more expensive option, typically starting at around $200 per square metre in comparison to $45+ per square metre for tiles.
Can you install glass splashback over tiles?
Installing the splashback Splashbacks can be installed over existing tiles, providing they’re securely attached to the wall and there are no cracks or broken tiles which might impact the adhesion of the panel.
Are glass splashbacks worth it?
Due to their protective nature when it comes to moisture and heat, glass splashbacks are ideal for use in bathrooms too. Glass, naturally, is a fantastic material for splashbacks. The protection offered by a good splashback, can in the long run, save you considerable amounts of money in remedial building costs.
Are glass splashbacks still in fashion?
They’re now a statement piece; a reflection of your interior style and way of living. Among the myriad of different splashback styles available, glass and tile continue to be the most sought-after choices.
What is the latest trend for kitchen splashbacks?
Kitkat. Gaining popularity in the last year or two, Kitkat-shaped mosaics have cemented themselves as one of the top kitchen splashback trends of 2022! And you’re not limited to just solid colours! Designer finish crackle glaze options have come onto the market as well as truly heavenly natural marble tiles too.
Can glass splashbacks be cut to size?
Like splashbacks made of natural stone, glass splashbacks require an additional level of kitchen design planning. That’s because the glass needs to be cut to size before it’s toughened. Once this is done, the entire piece cannot be cut or processed in any way.
Where can I get a splashback for my Kitchen?
Securely order your splashback and have it delivered direct to your door! At Colour 2 Glass we sell beautiful, top quality made to measure coloured, clear and printed glass splashbacks for your kitchens and bathrooms.
Where can I buy a made to measure splashback?
Securely order your splashback and have it delivered direct to your door! At Colour 2 Glass we sell beautiful, top quality made to measure coloured, clear and printed glass splashbacks for your kitchens and bathrooms. We also stock a wide range of standard size glass splashbacks or you can choose a made to measure splashback.
Should I continue the glass splashback on my Kitchen cabinets?
If the cabinets and worktop continue onto adjoining walls, continuing the glass splashback creates a continuous, seamless look. However, this also creates intersections where one glass panel meets the other.