How do I look up STIHL serial numbers?
Where do I find my serial number? Most serial numbers are stamped in the motor housing or crankcase to the left or right of the muffler looking down from the top on a flat surface. They will in most cases be 9 digits long and begin with the number 1, 2 or 5.
How do I identify my STIHL chain?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
What does the M stand for on STIHL chainsaws?
We’ll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.
What are the numbers on a Stihl chain?
Find the gauge of the chain by locating the number stamped on the drive link. A 1 equals a 0.043-inch gauge, 3 equals a 0.050-inch gauge, 5 corresponds to a 0.058-inch gauge, 6 means the chain has a 0.063-inch gauge. A 0 means the chain has a 0.080-inch gauge, but this gauge size is found only on the Harvester chain.
How do I reset my STIHL carburetor?
Return a type A carburetor to its factory setting by turning the “H” screw counterclockwise until it stops, turning the “L” screw clockwise until it is seated, then backing it off one full turn.
What does MS stand for in Stihl chainsaws?
Motorsäge
We’ll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.
What kind of engine does a Stihl chain saw have?
Compact, powerful and fitted with the M-Tronic (M) fully electronic engine management as standard – the new STIHL MS 261 C-M chain saw. More power, lighter weight and M-Tronic fully electronic engine management. Thanks to their extraordinary power and robust design, the new STIHL clearing saws are the choice of professionals.
What is the difference between a Stihl medium and large chainsaw?
With availability in two different sizes, users have an option for most STIHL chainsaws. The medium case accommodates models MS 170–MS 500i, and the large case accommodates models MS 661 C-M–MS 880 (R wrap handle versions are excluded from both cases).
What does the control unit do on a chainsaw?
The control unit uses engine temperature and speed to continually monitor each operating status of your chain saw, feeding in the correct amount of fuel so that you always benefit from optimal engine performance.
What size guide bar do I need for a Stihl saw?
Note: STIHL recommends #3624 (33 RS3-72) OILOMATIC® Saw Chain and 20” 3003 008 8921 Ematic™ guide bar combination. Compatible guide bar ranges: 16″ to 25″ Are You Ready for a STIHL? WARNING! The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw.