How do I put a password on my HP Router?

Posted on by David Darling

How do I put a password on my HP Router?

The default username for your HP router is admin. The default password is admin. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

How do I setup my HP ProCurve Switch?

How to: Configure a HP ProCurve switch

  1. Step 1: Connect your serial connection.
  2. Step 2: Conenct PuTTY.
  3. Step 3: Get the IP address.
  4. Step 4: Set time server.
  5. Step 5: Set SNMP community info.
  6. Step 6: Launch the web GUI.
  7. Step 7: Configure basic info.
  8. Step 8: Create VLANs.

How do I change my HP Wi-Fi Direct password?

In the EWS, click on Network, then on the left, under Wireless Direct Printing, choose Status. In the Status section, click on Edit Settings. You will now see the option to choose on with security and the section to customize the password.

What is the default password for Aruba switch?

The first time you log in to the switch you must use the default administrator account. This account has no password, so you will be prompted on login to define one to safeguard the switch. When prompted to log in, specify admin. When prompted for the password, press ENTER.

How do I reset my HP ProCurve 1700 to factory settings?

Re: reset a procurve 1700

  1. Remove the power cord from the back of the switch.
  2. Remove all cables from the front-panel ports.
  3. Connect port 1 to port 2 on the front panel, using a standard network cable.
  4. Reconnect the power cord to the rear of the switch.
  5. Wait at least 40 seconds before disconnecting port 1 from port 2.

How do I setup a password for WiFi Direct?

Tap Wi-Fi Direct to set up your Wi-Fi Direct connection settings.

  1. Checkmark the Wi-Fi Direct checkbox to turn it on.
  2. Tap Device name to open a dialog box to enter a name for your device.
  3. Tap Password to set or change your password for Wi-Fi Direct connection.

How do I find my HP WiFi Direct password?

Turn on the printer, and then make sure ink cartridges are installed and paper is loaded in the tray. Get the Wi-Fi Direct printer name (Example: DIRECT-72-HP Officejet Pro 6970) and password. Printers with a control panel menu: Touch the Wi-Fi Direct icon or button to view the Wi-Fi Direct name and password.

How do I change my BIOS administrator password?

Reset BIOS Password

  1. Enter the BIOS password (case sensitive).
  2. Press F7 for Advanced Mode.
  3. Select the ‘Security’ tab and ‘Setup Administrator Password’.
  4. Enter and confirm your new password, or leave this blank.
  5. Select the ‘Save & Exit’ tab.
  6. Select ‘Save Changes and Exit’, then confirm when prompted.