How do I reset my Samsung Blu-ray player to factory settings?

Posted on by David Darling

How do I reset my Samsung Blu-ray player to factory settings?

1 Power on your Blu-ray player if it’s not already on, tune your TV to the input where the Blu-ray player is connected. 2 With no disc in the player press and hold the Play/Pause button infront of the BD player for about 8 seconds or until “Resetting all settings to default values…” is displayed on your TV screen.

How do I reset my Blu-ray player to factory settings?

Follow these steps to perform a factory reset on your Blu-ray Disc™ player:

  1. On the supplied remote control, press the HOME button.
  2. Select Setup.
  3. Select Resetting or. icon.
  4. Select Reset to Factory Defaults Settings.
  5. Select All Settings.
  6. Select Start.
  7. Select Close.
  8. Turn off your device, then turn it back on.

How do I reset my Samsung Blu-ray player BD JM57C?

Factory Rest Samsung BD-JM57C Press and hold the Stop button on the panel until your TV displays the message “Reset all settings to the default values.” After a few seconds, the device will turn itself off and back on as well as reset itself.

How do I fix my Samsung Blu-ray player?

Samsung Blu-ray player is not responding

  1. Remove the disc. Press the eject button on the Blu-ray player to open the tray and remove the disc, and then press eject again to close the tray.
  2. Reset the player to factory settings.
  3. Perform a firmware update.

Can you reset Blu-Ray player?

Press the Home button on the Blu-ray Disc player remote. Once the menu is displayed, press the Left arrow button on the remote and navigate to the option Setup. On Setup, use the Down arrow button and go to Resetting and press the Enter button.

How do I reset my Samsung DVD player without remote?

Make sure there is no disc in the player. Press and hold the Eject button on the device for at least 8 seconds. On the screen you will see a message that the device is being reset. The player will automatically power off and reset then it will show the initial setup screen.

Is there a fix for Samsung Blu-ray player boot loop?

There is no software fix. “We are aware of the boot loop issue that appeared on certain 2015 Samsung Blu-Ray players and are offering free mail-in repairs to customers who have been impacted,” a representative of the mega-manufacturer said in a Samsung forum post.

How can I control my Samsung Blu-ray player without the remote?

Without the remote control, you can still achieve your purpose by trying the following methods.

  1. Method 1. Use the physical button on the Samsung Blu-ray Player.
  2. Method 2. Buy a universal remote.
  3. Method 3. Use smartphone with IR blaster.

How can I get my Blu-ray player to work without a remote?

You can control the playback with the buttons on your Blu-ray players. Somewhere on the front or even the top panel there should be some basic function buttons, including the universal Power on/off button, the Eject button, the Play/Pause button, the Skip track button and the Stop button.

How do I fix my Blu-ray?

4 Ways to Fix a Blu-ray Disc

  1. Make sure the disc is compatible with your player. Some older Blu-ray players — particularly some units manufactured several years ago — can not play some new releases.
  2. Clean the disc.
  3. Clean the player.
  4. Reset!

Why did my Blu-Ray player stop working?

There are several reasons a disc may not play in the Blu-ray player. A dirty or scratched disc is the most obvious cause, but an incorrect region code or configuration of your home theater system can be the reason as well.

How do I reset my Samsung DVD?

1 Factory Reset

  1. Make sure there is no disc in the player.
  2. Press and hold the Eject button on the device for at least 8 seconds.
  3. On the screen you will see a message that the device is being reset.
  4. The player will automatically power off and reset then it will show the initial setup screen.

How do I make my Samsung DVD player region free?

Step 1: Power on your Samaung DVD player and open the tray. Step 2: Push the info button on the remote one time. Numbers will appear on the screen. Step 3: Then press 9 for multi-region and hold it until you see the number 9 in upper left.

How do I Reset my Philips Blu-ray player?

2 With no disc in the player press and hold the Play/Pause button infront of the BD player for about 8 seconds or until “Resetting all settings to default values…” is displayed on your TV screen. The Blu-ray player then powers off and resets. NOTE: If you press and hold the stop button on your Blu-ray remote, this does not work.

How do I update the software on my Samsung Blu-ray player?

If the player is properly connected to the network by cable or wirelessly, the player will automatically connect to Samsung’s website each time it is turned on and download update files if any valid upgrade exists. Software update is the same as in the By Internet menu.

Why can’t my Samsung Blu-ray player play every disc?

• Samsung cannot assure that this player will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, CD software and/or the manufacture of discs.

What are Disques Blu-ray?

Page 69 Caractéristiques Principales Caractéristiques des disques Blu-ray Les disques Blu-ray prennent en charge des vidéos HD dont la qualité est la meilleure de l’industrie. La capacité supérieure de ces supports leur assure une absence totale de compromis en termes de qualité.