How do I setup my HP Deskjet 3520 wireless?

Posted on by David Darling

How do I setup my HP Deskjet 3520 wireless?

From your computer, search for and connect to the wireless direct name, such as HP-Print-**-Deskjet 3520. Install the HP printer software. When the Connection Options software screen is shown, select Wireless. When the list of detected printers is shown, select your HP printer, and then finish installing.

How do I factory reset my HP Deskjet 3525?

Remove the ink cartridges and reset the printer.

  1. Remove the ink cartridges from the printer.
  2. With the printer turned on, disconnect the power cord from the printer.
  3. Unplug the power cord from the power source.
  4. Wait at least 60 seconds.
  5. Reconnect the power cord to a wall outlet and to the printer.
  6. Turn the printer on.

How do I setup my HP Deskjet 3520 printer?

HP Deskjet 3520 Printers – First Time Printer Setup

  1. Step 1: Unpack the printer.
  2. Step 2: Connect the power cord and turn on the printer.
  3. Step 3: Select your language and country/region.
  4. Step 4: Install the cartridges.
  5. Step 5: Load plain paper.
  6. Step 6: Align the cartridges.
  7. Step 7: Install the printer software.

How do I reset my HP Deskjet 3520 printer?

With the printer turned on, disconnect the power cord from the rear of the printer. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet.

How do I reset my HP printer to factory settings?

9.18. 4. How to reset to factory settings on HP printers

  1. Open the printer’s web page and Sign in as Administrator.
  2. On the General tab select Reset Factory Settings in the menu.
  3. In the section Reset Firmware select Reset.
  4. Select Reset. The printer will now restart.
  5. Set printer’s date and time correctly.

How do I reset printer settings?

It’s a pretty simple process:

  1. With the printer turned on, pull out the power cable from the back of the printer.
  2. Unplug the power cable from the wall outlet.
  3. Wait 15 seconds.
  4. Plug the power cable into the back of the printer.
  5. Plug the printer back into the wall outlet.
  6. Turn the printer back on.
  7. Run a test print.