How do you dilute garlon 4?
Mixing Directions Garlon 4 may be foliarly applied by diluting with water or by preparing an oil-water emulsion. For woody plant control, an oil-water emulsion performs more dependably under a broader range of conditions than a straight water dilution and is recommended for aerial applications.
What is the mix ratio for triclopyr 4?
The mix rate for triclopyr is 3.2oz to 6.4oz per gallon. Triclopyr is more effective if mixed with a bark penetrent like methylated seed oil.
How many ounces of garlon is in a gallon of water?
This breaks down to 25-38 oz of Garlon 4 per gallon of oil solution. 4 of 6 people found this answer helpful.
How do you mix triclopyr 4 with water?
The mix rate for Triclopyr 4 varies depending on the application method and target plant. For spot treatments to ornamental turf, Mix 3/8 (0.375 oz.) to 3/4 (0.75) fluid ounces of Alligare Triclopyr 4 per 1000 square feet in 1 to 2 gallons of water. For more specific application rates please refer to the label.
Does garlon 4 Need surfactant?
In all cases use the amount specified in enough water to give uniform and complete coverage of the plants to be controlled. The recommended order of addition to the spray tank is water, spray thickening agent (if used), surfactant (if used), additional herbicide (if used), and Garlon 4.
What is the difference between garlon 3 and garlon 4?
Both Garlon 3A and Garlon 4 Ultra are formulations of the active ingredient, triclopyr. Garlon 4 Ultra is a 4 pound acid equivalent per gallon (lb ae/gal) low volatile ester in a plant based oil carrier, whereas Garlon 3A is a 3 lb ae/gal water soluble amine in water.
Can you mix garlon 4 with diesel?
– Using diesel fuel, fuel oil, kerosene or a commercial oil diluent, mix a 12½ % solution of Garlon 4, Tahoe 4 or Element 4 (active ingredient triclopyr). For a four gallon backpack tank this would be ½ gallon of herbicide plus 3½ gallons of diluent.
Is garlon 4 restricted use?
Tordon 101M and Tordon K are federally Restricted Use Pesticides. State restrictions on the sale and use of Garlon 4 Ultra apply. Consult the label before purchase or use for full details.
Does garlon need a surfactant?
Apply Garlon 3A when purple loosestrife is at the bud to mid-flowering stage of growth. Follow-up applications for control of regrowth should be made the following year in order to achieve increased control of this weed species. For all applications, a non-ionic surfactant should be added to the spray mixture.