How do you use stiffener in CATIA?

Posted on by David Darling

How do you use stiffener in CATIA?

If you click the Selection field and select another sketch, CATIA immediately creates the Stiffener. Clicking the icon opens the Sketcher. You can then edit the profile to modify your stiffener. Once you have done your modifications, you just need to quit the Sketcher.

How do I show threads in Catia?

Thread-Tap Analysis

  1. Click the Tap/Thread Analysis icon .
  2. Click Apply to display the representations and the values of the threads and tap contained in the document.
  3. Click More to access display filters.
  4. By default, the options “Show thread” and “Show tap” are on.
  5. Click Apply to run the analysis.

How do you make ribs with CATIA?

CATPart document.

  1. Click Rib . The Rib Definition dialog box is displayed.
  2. Select the profile you wish to sweep, i.e. Sketch . 2 .
  3. Select the center curve, i.e. Sketch. 1 .
  4. To go on with our scenario, maintain Keep angle.
  5. Click OK .

How do you dimension holes in Catia?

Creating a Hole Dimension Table

  1. Select one or more holes and center lines (only center lines not associated with a hole) in the drawing.
  2. Click Hole Dimension Table in the Dimensioning toolbar.
  3. Choose 2D reference axis system for the axis system from the associated drop-down list.
  4. Type the table name in the Title field.

How do you draw helix in Catia?

Creating a Helix

  1. Click Helix . The Helix Curve Definition dialog box appears.
  2. Select a starting point.
  3. Select an axis.
  4. Set the helix parameters. Pitch : the distance between two revolutions of the curve.
  5. Click Reverse Direction to invert the curve direction.
  6. Click OK to create the helix.

How do I use Groove command?

Click Groove . Select Sketch. 3 as the profile to be used….Just a portion of material is removed now.

  1. Click the Reverse Direction button to inverse the revolution direction, or use the Reverse direction contextual command available from the arrow.
  2. Click OK to confirm the operation.
  3. Double-click the groove to edit it.

How do I create a slot in Catia?

To define a slot, you need a center curve, a planar profile, a reference element and optionally a pulling direction. Select the profile, i.e. Sketch….It is closed.

  1. Click to open the Sketcher and edit the profile.
  2. For example, enlarge the profile.
  3. Quit the Sketcher when done.
  4. Maintain the Keep angle option.

What is rib command?

Rib command. Constructs a rib by extruding a profile. The Direction and Side steps allow you to control the shape of the rib.