How much HP is a B20B?
126 hp
The B20B found in the US-spec CR-V was seen in the 1997-up models, sporting 126 hp and 133 ft-lbs of torque.
What cars did the H22 come in?
The H22 debuted in the U.S. in 1993 as the H22A1 for use in the Honda Prelude VTEC. Since then, versions of the H22 would become the Prelude’s signature high-performance engine worldwide until the end of Prelude production in 2001.
How much HP does a H22 have?
H Series Motor Specifications Chart 1
| Engine | Type | Power |
|---|---|---|
| H22A | Closed Deck | 220 PS (162 kW; 217 hp) @ 7,200 rpm & 163 lb⋅ft (221 N⋅m) @ 6,500 rpm |
| H22A1 | 190 PS (140 kW; 187 hp) @ 6,800 rpm & 158 lb⋅ft (214 N⋅m) @ 5,500 rpm | |
| H22A2 | Closed Deck | 185 PS (136 kW; 182 hp) |
| H22A3 | 182 hp (185 PS; 136 kW) |
Can you turbo a H22A?
Short of the K-series motors, the H22 has the most torque out of any Honda four-cylinder motor and backs it up with 200-plus hp. Bolt a turbo setup onto a stock H22 and it becomes a very potent machine. Build a turbo motor out of an H22 and it’s unstoppable.
What is the difference between F20B and H22A engines?
If response means the engine’s willingness to rev and the immediacy of the throttle pedal spinning the motor up, then the F20B is your engine. If your definition of response is in having a more immediate spread of torque available throughout the rpm range, then the higher displacement H22A is the winner.
Is the Ford F20B a good engine to buy?
The F20B block can rev up to 9,000 rpm, and still be a reliable ride. This is because the F20B has a better R/S (rod length to stroke length) ratio than the H22A. You can add camshafts like the Skunk2 Stage II cams to the F20B, which allows the camshafts to take advantage of the engine’s high 11.0:1 compression ratio.
When did the Honda H22A1 engine come out?
Honda introduced the H22 engine series in 1993, and the company used the H22A1 in the Prelude VTEC until the end of the car’s production in 2001. As Honda’s high-performance engine, drivers raced variations of the motor to compete as well as win in the European F3 Series, the British Touring Car Championship, and the Japan Touring Car Championship.
What is the bore and stroke size of a H22A?
H22A Specifications. Bore × Stroke: 87.0 mm × 90.70 mm (3.425 in × 3.571 in) Displacement: 2,157 cc (131.6 cu in) Torque: 161 lb/ft (218 Nm) Valve configuration: DOHC, 16 valves, VTEC. Type: inline four-cylinder, aluminum head and block.