Is Bolex a 16mm?
Bolex (latterly) did offer a factory Super 16mm camera. This has the appropriate markings in the viewfinder and the film gate is machined and polished to professional standards.
What lens mount is Bolex H16?
For Practical Bolex H16 Filming All the Prime lenses manufactured by Bolex are designed for cameras having a C type lens mount and mostly all were produced in two different versions. The first version was designed for any camera that would accept a C type lens.
How much does a Bolex H16 weigh?
WEIGHT: 6 lbs. 12 oz.; Approximately 8 1/2 lbs with magazine.
What is the shutter speed on a Bolex H16?
To compensate for this, Bolex has determined that the effective shutter speed for the H16 camera is 1/80 second rather than the standard 1/65 of a second.
What film does Bolex H16 take?
FILM CAPACITY: 100ft (30m) and 50ft (15m) daylight loading spools of 16mm film. THREADING: Automatic threading and loop forming. The end of the film is simply placed in a channel leading to the feed sprocket. The release is pressed and the film is then automatically threaded throughout the entire mechanism.
What film does Bolex h16 take?
How do you identify Bolex?
Depending on the model of your camera, the S/N may be located on several places: behind the bottom lens position and behind the turret plate; stamped inside the film chamber; stamped to the inside of the film chamber door; engraved on the bottom of the camera near the tripod mounting screw; engraved on the bottom of …
What is the difference between 16mm and Super 16mm?
A Super 16 frame is 20 to 40% larger than a regular 16 mm frame depending on the aspect ratio chosen. The native aspect ratio of a Super 16 frame is 1.66:1, which is a good fit for the HDTV aspect ratio of 1.78:1 (19 x 9) or the theatrical release format of 1.85:1.
Is 16mm expensive?
A 400′ roll of brand new 16mm film (not re-cans) will run you about $100 – $125, and will give you 11 minutes of footage. The processing/scanning will come out to be around the same, so for every 11 minutes you shoot, you’re looking at about $250 all in.
Where is Bolex serial number?
Serial Numbers and Dates of Manufacture The serial number on this model can be found inside the film chamber, near the top spindle. A matching number can also be found inside the film chamber door.
Where is serial number on Bolex?
What is the shutter speed of a Bolex?
1/80 second
To compensate for this, Bolex has determined that the effective shutter speed for the H16 camera is 1/80 second rather than the standard 1/65 of a second.
When was Super 16 released?
1969
Introduced in 1969 by Swedish cinematographer Rune Ericson, Super 16 increases the image quality 20–65% by using the area of the film reserved for the optical soundtrack in standard 16mm format.
What is the shutter angle on the Bolex H16 reflex?
It is an extremely versatile, portable, dependable, well-built camera. The self- threading allows easy loading of daylight spools. This cameraʼs features include single frame, ex- tended exposure, slow motion, a 135° angle vari- able shutter, and backwind.
Is Super 8 the same as 16mm?
The frame size (picture taking area) of 16mm film is about 10.26mm x 7.49mm. While both standard 8 and super 8 film are both 8mm in width, Super 8 film stock has a slightly larger frame size. Standard 8mm film has a frame size of roughly 4.5mm x 3.3mm, while Super 8 film has a frame size of around 5.8mm x 4.01mm.
What is the Bolex H-16 reflex?
The H-16 Reflex incorporated several new designs to the Bolex H camera. A system of ten optical prisms was utilized in a new viewing system, allowing through-the-lens framing and focusing. Unlike other reflex cameras, the Bolex reflex used a semi-reflecting prism located behind the lens and in front of the shutter.
What is the serial number on a Paillard-Bolex H-16?
The earliest H-16 cameras, manufactured before serial number 9400 had the Paillard-Bolex logo embossed directly into the leather. Cameras manufactured after #9400 were constructed with a metal logo plate attached with two screws.
What is a Bolex reflex camera?
Unlike other reflex cameras, the Bolex reflex used a semi-reflecting prism located behind the lens and in front of the shutter. The advantage was flicker-free viewing during filming.
What happened to the original H-16?
Over the next decade, the H-16 saw several alterations. The spring motor of the original H-16 was designed to be wound with a winding crank or key; early instruction manuals seem to suggest the camera was supplied with either one or the other, but not both.