What does apron mean in tub?
An alcove tub is flanked on three sides by walls. This allows manufacturers to use spirited tubs, skirted tubs, sometimes called apron tubs, would have a decorative front, and three sides that are open to the wall cavity. Less finished material means that apron tubs tend to be more affordable than other types.
What does apron front mean for bathtub?
A Skirted tub is a style of tub that is finished on one side with a skirt or apron that is either flat or bowed. This skirt covers the entire length of the bathtub itself with the intent of making it much easier to install and provides an area to rest on.
What is the difference between apron front and alcove tub?
The fourth and front side of the tub, one of the longer sides, is finished and is called an “apron.” The apron covers the exposed side of the alcove and adds support and style to the bathtub. The alcove tub is named for the installation method used.
What is a standard size alcove bathtub?
The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.
How do you attach a tub apron?
Install the apron by sliding the upper edge of the apron under the edge of the bathtub and centre the apron between the two walls. Maintain the apron in position and insert the plastic thumb screws through the holes under the lower edge of the apron and in the hardware (Fig. 7.1). Do not over-tighten.
What’s the difference between an alcove bathtub and a drop-in bathtub?
Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.
What are the standard sizes for bathtubs?
Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long. Persons over six feet tall may want to consider an oversized bathtub for the most comfort.
What is integral apron bathtub?
Integral apron Exposed external wall of a bathtub or whirlpool bath. It may be integral to the overall structure of the fixture or may be removable for access to whirlpool pump and motor.
What is the difference in a drop in tub and an alcove tub?
What is the difference between an alcove and standard bathtub?
The term alcove doesn’t refer to the shape or size of the bathtub, but the installation. Alcove tubs are unfinished on three sides with the fourth side, usually one of the long sides, finished with a tub apron. The tub gets installed into an alcove section of the bathroom with three of its sides enclosed by a wall.
How deep should a bathtub alcove be?
A standard alcove tub will have an average depth of 14-15 inches with a soaking depth of around 9 inches. Most adults could not have their body fully submerged in a standard size tub.
What is the difference between alcove and drop-in tub?
Why are drop-in tubs more expensive?
Built-in tub pro and con: benefits depend on the tub type Drop-In: A drop-in tub can be more cost-efficient because of install and materials, these tubs are often acrylic and not cast iron.
How do you install a tub apron?
What does a skirted tub mean?
A Skirted tub has one finished side and is placed between two walls and attached on the back side.