What does EP grease stand for?
extreme pressure
The term EP refers to extreme pressure, which means the grease is formulated with additives that increase its load carrying capacity.
What is the difference between EP 1 and EP2 grease?
Mobilux EP 0 and 1 are suitable for centralised systems. Mobilux EP 2 are general-purpose greases. The recommended operating temperature range is from -20ºC to 130ºC, but they may be used at higher temperatures if the lubrication frequency is increased accordingly.
Is EP grease good for wheel bearings?
Yes, moly EP grease contains molybdenum disulfide, an anti-wear additive that helps greases withstand extreme pressure applications. This makes it suitable for wheel bearings.
Is NLGI the same as EP?
This tells us two things, EP 2 grease is a NLGI Grade 2 and it is fortified with Extreme Pressure (EP) additives. This tells us nothing else about the thickener type, base oil type or viscosity of the base oil. The correct NLGI grade is an important consideration because not all grease applications are the same.
What is the best grease to use on wheel bearings?
- Editor’s Choice: Valvoline Full Synthetic Grease.
- Lucas Oil X-Tra Heavy Duty Grease.
- Lucas Oil Red ‘N’ Tacky Grease.
- Mag 1 High-Temp Wheel Bearing Grease.
- Mobil 1 Synthetic Grease.
- Timken Premium Red Wheel Bearing Grease.
- Sta-Lube New Generation Wheel Bearing Grease.
What grease do mechanics use?
LITHIUM GREASE: Lithium grease is the most commonly used grease in the world. Its popularity is due to its excellent high temperature and water resistant properties making it a great all-rounder. In the auto workshop it is used to lubricate wheel bearings and for chassis applications.
Can you over grease a ball joint?
One concern about greasing ball joints is not wanting to overfill it and bust the seal between the ball joint and the dust boot, which leaves the joint open to contaminates that can potentially lead to failure.
Can I use any grease for ball joints?
The best ball joint grease for your vehicle and environment will depend on a few factors but basically any grease rated “GC-LB” by the NLGI (National Lubricating Grease Institute) is graded to work for ball joints.
What does NLGI stand for in grease?
National Lubricating Grease Institute
Traditionally, a grease’s stiffness is indicated by its penetration value and is evaluated using the standardized National Lubricating Grease Institute (NLGI) grade chart. The NLGI number is a measure of the grease’s consistency as indicated by its worked penetration value.
What does NLGI mean in grease?
What does the Perma lubricant overview indicate?
The perma lubricant overview indicates the max. speed for grease lubrication of deep groove ball bearings. The n x dm factor is a criterion for the selection of the grease taking into consideration bearing size and operating speed. Calculation: n x dm = speed factor dm = (D + d) ÷ 2 n = Operating speed (1/min) D = Outside bearing diameter
What is NLGI Grade 2 lubricant?
NLGI starts at 000 (liquid) to 6 (very stiff). Greases up to NLGI grade 2 are suitable for use in perma lubrication systems. Thickeners The thickener acts like a sponge. It holds the individual components of the grease together and ensures that the oil stays at the contact point.
What is 9×6 lubricant used for?
9X6 Pure Silicone Lubricant – “PROVIDES THE SLIDE TO THE GLIDE” STAIN FREE, RESIDUE FREE, TASTE FREE, ODOR FREE, GLYCERIN FREE, PARABEN FREE, FRAGRANCE FREE, ENVIRONMENTALLY SAFE, NEOPRENE SAFE, SILICONE SAFE, LEATHER SAFE, SHEET SAFE, LATEX SAFE, and SKIN SAFE. 9X6 protects against UV light and corrosion in extreme low to high temperatures.
What is the operating temperature of Royal Purple Ultra purple 2?
2 Thickener Li complex Base oil Synthetic Operating temperature [°F] -40 to 399 Operating temperature [°C] -40 to 204 Viscosity at +40 °C [mm²/s] 220 Superior wear protection Superior pumpability at low temperature Easily pumped Royal Purple Ultra Performance No. 2 NLGI-grade 2